wireless network connection
and configuration
MANUAL NETWORK CONNECTION
By typing in the IP address, you can connect to a network via an AP (access point) in the
wireless network service area.
PRECHECK!
Select the record (
1. Touch the Network ( )
the desired AP's icon (
•
The IP setup screen appears.
•
If you select a WPS AP, touch the WPS PIN tab on the bottom
of the LCD screen, and then enter the generated PIN number in
the AP device within 2 minutes.
2. Touch each item and enter the required value by using the virtual
keyboard.
Submenu items
•
IP: Provide the IP address.
•
Subnet Mask: Provide the subnet mask.
•
Gateway: Provide the gateway.
•
DNS Server: Provide the DNS address.
3. When done, touch the (
•
The camcorder connects to the network via the selected AP.
•
For more information about the network settings, contact the network administrator or the service
provider.
•
The network settings may differ, depending on network conditions.
•
Do not try to connect to a network that you have no permission to access.
114
•
Use a fully charged battery while you are using network services.
/
) mode by pressing the MODE button.
"Settings"
)
"IP Setting"
) tab.
OK
(HMX-S15/S16 only)
page 27
"Access Point Setting"
"Manual."
OFF
OFF
WPS
WPS PBC
OFF
OFF
OK
OFF
OFF
OK