Scanning Screen - Radiodetection RD1000 Operation Manual

3.3 Scanning Screen

After pressing the Scan button, wait a few seconds for the vertical
depth scale to appear on the right side of the screen, and then
push the Cart forward.
A cross-sectional image of the ground scrolls onto the screen from
the right to left. The position is displayed on the horizontal axis
at the top while the depth is displayed on the vertical axis. The
position and depth axes units are meters or feet depending on the
units set in the Systems Setting Screen (Section .).
If the Scale or Both option is
selected (Section .), horizontal
depth lines appear on the image
to assist with determining the
depth of targets.
Approximately 16 meters or
50 feet of data is displayed on
one screen. If the survey line
exceeds this distance the image
will scroll off the left side of the
screen.
To save the current screen image to file, press the Camera button
on the Display Unit. The image number appears on the bottom of
the screen with a message to press any button to continue.
A message will appear on the screen if there is no Compact Flash
card in the Display Unit. Images are only saved when a card is
present.
Pressing any of the number
buttons on the Display Unit
marked 1 to 8 while scanning
adds a numbered marker at the
current position.
16 RD1000™ Operation Manual
Figure .8:
number marker
Figure .7:
scanning screen