Gpr Emissions, Interference And Regulations; Fcc Regulations; Part 15 - User Information - Radiodetection RD1000 Operation Manual

Appendix A

GPR Emissions, Interference and Regulations

All governments have regulations on the level of electromagnetic
emissions that an electronic apparatus can emit. The objective
is to assure that one apparatus or device does not interfere with
any other apparatus or device in such a way as to make the other
apparatus non-functional.
The manufacturer test their GPR products using independent
professional testing houses and comply with latest regulations
of the USA, Canada, European Community, and other major
jurisdictions on the matter of emissions.
Electronic devices have not always been designed for proper
immunity. If a GPR instrument is placed in close proximity to an
electronic device, interference may occur. While there have been
no substantiated reports of interference to date, if any unusual
behavior is observed on nearby devices, test if the disturbance
starts and stops when the GPR instrument is turned on and off. If
interference is confirmed, stop using the GPR.
Where specific jurisdictions have specific GPR guidelines, these
are described below.

FCC Regulations

This device complies with Part 15 of the USA Federal
Communications Commission (FCC) Rules. Operation in the USA
is subject to the following two conditions:
1. this device may not cause harmful interference and
. this device must accept any interference received, including
interference that may cause undesired operation.
Part 15 – User Information
This equipment has been tested and found to comply with the limits
for a Class A digital device, where applicable, and for an ultrawide
40 RD1000™ Operation Manual