Tools & Setup
Touch Screen
The test checks proper operation of the touch screen (Figure 6-15). It allows you to test the
screen (by pressing Test) or perform a quick calibration followed by a test (by pressing
Calibrate). Both involve touching targets on the screen in the allotted time.
Figure 6-15: Touch screen test on the left, Touch screen calibration test on the right
GPS
The GPS test will ensure that the system is communicating properly with the GPS and receiving
data. Whichever GPS mode is selected in the System Settings (6.2.3) will be the one used for
the test. Pressing GPS will show the screen in Figure 6-16.
Figure 6-16: GPS Test
© Radiodetection 2016
31
RD1500 Operation Manual