Advertisement
3. After entering the user name and password, the Web
main screen appears as shown in Figure 4-2.
Figure 4-2: Web Main Screen of GSW-2400HPS
Now, you can use the Web management interface to
continue the Switch management. Please refer to the user
manual for more details.
For
security
reason,
memorize the new password after this first
setup.
Note
5. Changing IP Address or Forgotten
Admin and Password
To reset the IP address to the default IP Address
"192.168.0.100", and the user name and password to
– 5 –
please
change
and
factory default mode (default user name and password are
"admin"), press the hardware reset button at the front
panel for about 5 seconds. After the device is rebooted,
you can login the management Web interface with the
same subnet of 192.168.0.xx, and default user name and
password.
PWR
2
4
6
8
10
12
14
16
1
3
5
7
9
11
13
15
GSW-2400HPS
6. Customer Support
Thank you for purchasing PLANET products. You can browse
our online FAQ resource at the PLANET Web site first to
check if it could solve your issue. If you need more support
information, please contact PLANET switch support team.
PLANET online FAQ :
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address :
support_switch@planet.com.tw
Copyright © PLANET Technology Corp. 2013.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other
trademarks belong to their respective owners.
– 6 –
24-Port 10/100/1000Mbps
802.3at PoE+
Web Smart Ethernet Switch
18
20
22
24
PoE In Use
1000
LNK
ACT
10/100
LNK
ACT
Reset
17
19
21
23
PoE In Use
Hardware Reset
Advertisement
