Effect - Two Scene Mode - Philips Strand Lighting 100 plus series Operation Manuals

Operations Manual
Press one of the Effect buttons - Forward, Reverse, Random, or Bounce.
5
2
Manual
FORWARD
RECORD
H OLD
DE L
Table 3 provides details of each Effect Button's operation.
The lights will now operate a chase in the selected Effect mode. The Effect Master will inhibit the levels of all effect
channels. The fade time rotary becomes the SPEED dial. Set the speed of the effect as desired. The LED Display will
show the set rate.
The effect can be faded in rather than the effect starting abruptly by pulling down the Effect Master and fading it up at
the appropriate time.

7. Effect - Two Scene Mode

To run the effect in two scene mode, just change the MODE Button to two scene. Once the LED indicator illuminates
"Two Scene", the console is set to two scene mode. Now all of the fader levels from the top fader bank will become
the faders in the effect. With both playbacks in the up position, just press any of the effect directional buttons and the
effect will start immediately.
Once the effect is running, adding new fader levels will add those faders into the effect.
Note: Only the faders in the top fader bank can be used in the effect. Press the effect button again to stop.
1 2
CONSOLE OPERATION
5min.
REVERSE RANDOM
MODE
TWO SCENE
SINGLE SCENE
MEMO RY
Figure 11: Hold Button - Single Scene Mode
Button Name
Forward
Reverse
Random
Bounce
BOUNCE
PREVIEW
FLASH
OFF
CH 1-12
CH 13-24
Operation / Meaning
Forward allows the faders that have a level to step
through their appropriate levels from the lowest
number fader number to the highest.
Reverse allows the faders that have a level to step
through their appropriate levels from the highest
number fader number to the lowest.
Random allows the faders that have a level to step
through their appropriate levels in a randomly
Bounce allows the faders that have a level to step
through their appropriate levels from the lowest
number fader number to the highest then back to the
lowest number fader.
Table 3: Effect Buttons
Effect Buttons
generated order.