Page 1
For factory use only PART NO: 38435887 2-Tier DVD Shelf with Drawer Congratulations on your latest Atlantic purchase. Follow these simple instructions and you’ll have your DVD shelf assembled in no time. Max loading weight of each shelf up to 11lbs (5kgs).
Page 2
Max loading of each shelf machine plus DVD shelf . product.
Parts List Qty. . y t Tools Needed (not included) Safety Glasses 5/32”or 4mm Lag Bolt Drill Bit 5/32 in or Philips Stud Finder Screwdriver Drill...
Page 4
Should you want to mount your TV mount into any surface other than wood studs, Atlantic recommends that you seek the assistance of a professional installer. Using a stud finder, locate center of wood studs in your wall, then hold wall plate (A) against wall at your desired location.
Page 5
Step 3 Hang the glass support into the holes of wall plate. Step 4 Fix the glass support with screws(H).
Page 6
Step 5 Pull the drawer out, then attach the drawer(D) to the wall plate with screw(K), washer(N) and hex screwdriver(P). Step 6 Insert rubber pad(L) into the holes of glass support, put glass shelf(E) onto rubber pad, then fix it with screw(K). Put the glass shelf(F) onto the rubber pad of the drawer.
Page 7
11lbs(5kgs) 11lbs(5kgs) Product Warranty: Atlantic Inc., warrants to the original purchaser that its products are free from defect in materials and workmanship. If after inspection, we find that the product was defective in materials or workmanship we shall repair or replace the product at our discretion.
Need help?
Do you have a question about the 38435887 and is the answer not in the manual?
Questions and answers