BUTTONS AND INDICATORS
BATTERY CHARGE
Answer/Terminate call
Mute/Pause
MODE button with
status indicator
Volume
To charge, plug USB-C cable
in USB power adapter or
Reset
computer and connect to your
Battery indicator
speaker. Light indicator shows
USB-C Charge Socket
the charging progress.
AUX Socket
Stereo
*Please note that power adapter is not
Left channel
included with the product. When not charging
Right channel
and battery level is below 5%, the battery
indicator will light up.
2017_10_31_Vifa Reykjavik_QuickGuide_UK_V2.4.indd 1
CONNECTING WITH BLUETOOTH
1
2
3
Above 95%
Between 80 and 95%
To turn Reykjavik on, press
Press and hold the MODE
Enable Bluetooth pairing
and hold the MODE button
button until status indicator
on your device and select
Between 15 and 80%
until status indicator turns
flashes BLUE.
VIFA_REYxxxxxx as your
solid WHITE.
Bluetooth device.
Below 15%
* To turn off, press and hold the MODE
button until the status indicator flashes
WHITE. Then release.
CONNECTING WITH BLUETOOTH
WIRED CONNECTION
4
1
2
14:52
Bluetooth
Bluetooth
Paired
The status indicator turns
To turn Reykjavik on, press
Connect the wire,
solid BLUE when a
and hold the MODE button
(
USB-C or
AUX ) and
connection is established.
until status indicator turns
start music playback from
solid WHITE.
your device.
*During music streaming, press the
Mute/Pause button to play/pause music.
WIRED CONNECTION
SPEAKER PHONE
3
The status indicator turns
Receive incoming call
Terminate a call
solid GREEN when wired
The status indicator flashes
Briefly press the Answer/
playback is enabled.
GREEN. Briefly press the
Terminate call button again.
Answer/Terminate call
button.
*During music streaming, press the
Mute/Pause button to Mute/Unmute
music.
SPEAKER PHONE
Reject incoming call
Mute a call
Press and hold the
During a call, briefly press
Answer/Terminate call
the Mute/Pause button
button.
to mute or unmute the
microphone. The status
indicator flashes WHITE
when muted.
31-10-2017 14:43:07
Need help?
Do you have a question about the VIFA070 and is the answer not in the manual?
Questions and answers