Browsing The Machine's Status; General Settings - Samsung CLX-8540ND Series User Manual

Browsing the machine's status

You can browse the machine information and validate some features of
the machine.
Press Machine Setup on the control panel.
1
Press Machine Status > the Machine Info. tab.
2
Option
This option shows the customer support
Machine Details
information on the email address and the
phone number you stored from Admin
Setting. Also, you can check the machine's
serial number, or the hardware and software
information specification.
You can print various helpful and informative
Print/Report
reports such as System Report, Fax Report
and Scan Report. (Page 13.1)
The screen shows the trays installed on
Tray Status
your machine, and their current
configurations. Select the tray and Edit to
change the settings for paper type and size.
You can view the amount of each category
Usage Counters
that your machine has printed so far. To
print this report, see page 12.15.
Description

General settings

Before you get ready to using the machine, it is recommended to set up
the machine parameters.
Press Machine Setup on the control panel.
1
Press Admin Setting. When the login message pops up, then enter
2
password and press OK. (Factory setting is 1111.)
Press the General tab.
3
Option
The sub-options available are Service Center
Device Info
Registration and Contact Info. You may enter
information on service center and purchasing
point.
You can set the date and time. (Page 3.5)
Date & Time
• Default Window: Set the first window that
Default Settings
• Default Option: Changes all the default
• Home: Allows user to arrange each function
Note:
installed or the category you selected, the
selectable options on the display screen may
differ.
This option lets you change the measurement
Measurements
unit to use (mm or inch), and set the numeric
separation (comma or period).
12.2
<Machine status and advanced set-
Description
will appear on the display screen after turning
on the machine or waking up from the Power
Save. For example, if you select Fax as a
default window, the first window will be the
Basic tab of the Fax feature. In case you
want to show ID Copy as a default window,
you need to enable this feature in Default
Option previously.
values for copying, faxing, emailing, scanning
and paper at once. (Page page 3.7)
in the display screen.
Depending on the optional kit you