Onkyo A-9110 Instruction Manual page 8

Operating other components
You can operate Onkyo CD players, tuners, network audio players, and RI docks with the remote controller of this unit.
∫ Operating an Onkyo CD player
Point the remote controller at the CD player.
10.CD Í button
11.Play mode buttons
0 If you have a Network CD player, then the RI function
enables use of the < and > buttons when you connect it
with an RI cable (p11). When using these buttons, point
the remote controller at the remote control sensor of this
unit.
8
∫ Operating an Onkyo tuner, network audio
player, or RI dock


You can use the RI function to centrally control with the
remote controller of this unit by connecting this unit and the
other audio components with an RI cable (p11). Point the
remote controller at the remote control sensor of this unit to
operate.
12.Cursor buttons (D/C/B/A), ENTER button: Select items
with the cursor buttons and press ENTER to confirm.
13.Play mode buttons
0 When using a network audio player, the MENU button
works as a back button that takes you back one step in
the settings to the previous display or state.
14.INPUT button
0 When using a tuner, this works as a BAND button.
0 The INPUT button is not used for RI docks.
Before use


