Erasing The Entire Homelink Memory (All Three Programs) - Lexus LX 470 Owner's Manual

(c) Erasing the entire HomeLink
(all three programs)
To erase all previously programmed codes at one time, press
and hold down the 2 outside buttons for 20 seconds until the
indicator light flashes.
If you sell your vehicle, be sure to erase the programs stored
R
in the HomeLink memory.
CAUTION
D When programming the HomeLink
Transceiver, you may be operating a garage door or
other device. Make sure people and objects are out
of the way of the garage door or other device to
prevent potential harm or damage.
R
D Do not use this HomeLink
Universal Transceiver
with any garage door opener that lacks the safety
stop and reverse feature as required by federal safety
standards. (This includes any garage door opener
model manufactured before April 1, 1982.) A garage
door opener which cannot detect an object (signaling
the door to stop and reverse), does not meet current
federal safety standards. Using a garage door opener
without these features increases risk of serious
injury or death.
R
memory
FCC ID: CB2V94800
CANADA: 1763 102 264
This device complies with FCC Rules part 15.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference that
may be received, including interference that may
cause undesired operation.
transmitter has been tested and complies with
FCC and DOC/MDC rules.
R
Universal
modifications not expressly approved by the party
responsible for compliance could void the user's
authority to operate the device.
INTERIOR EQUIPMENT
WARNING: This
Changes or
65