Table of Contents
Advertisement
40X010a
Before putting on the wheel, remove any corrosion on the
mounting surfaces with a wire brush or such. Installation of
wheels without good metal−to−metal contact at the mounting
surface can cause wheel nuts to loosen and eventually cause
a wheel to come off while driving. Therefore after the first 1600
km (1000 miles), check to see that the wheel nuts are tight.
IN CASE OF AN EMERGENCY
40X011a
8. Reinstall all the wheel nuts finger tight.
Reinstall the wheel nuts and tighten them as much as you can
by hand. Press the tire back and see if you can tighten them
more.
40X012a
9. Lower the vehicle completely and tighten the wheel
nuts.
269
Advertisement
Table of Contents
