2060-B Arabidopsis Leaf Clip; 2060-A Fiberoptics Holder For Surfaces - Walz MINI-PAM-II Manual

Chapter 4
4.4.3

2060-B Arabidopsis Leaf Clip

This leaf clip is designed to position small samples in the beam
of the fiberoptics of the MINI-PAM-II. Usually, the 2060-B clip is
combined with the 2065-M Mini Quantum/Temp.-Sensor to
measure PAR at sample level and lower leaf temperature (see
Fig. 7, page 18).
Fig. 7: 2060-B Arabidopsis Leaf Clip & 2065-M Mini Quantum/Temp.-Sensor
4.4.4

2060-A Fiberoptics Holder for Surfaces

The holder positions the fiberoptics of the MINI-PAM-II on bulky
samples. When combined with the 2065-M Mini Quantum/Temp.-
Sensor, temperature of and temperature and PAR impinging on
the surface area investigated can be measured (see Fig. 8, page
19).
18
Components and Setup