Program/Clock Settings - Walz MINI-PAM-II Manual

Chapter 7
tance fiber optics tip to sample level: 7 mm; angle between end
piece of fiber optics and sample level: 60°). Saturation pulse in-
tensity can be adjusted at increments of 500 µmol m
7.3.3

Program/Clock Settings

The menu "Program/Clock Settings (Fig. 43) provides all options
to configure automated experimental routines including Actinic +
Yield, Induction Curve and Light Curve experiments as well as
repetitive triggering of single measurements and experimental
protocols.
Clock
On/off switch of clock. The "Clock" triggers repetitively an event
at a defined interval. The interval is specified in "Clock Interval"
and the event in "Clock Item".
Clock Interval
Adjust clock interval between 10 s and 60 min by selecting "In-
Program/Clock Settings
Clock
Interval (mm:ss)
Clock Item
Actinic + Yield
Induction Curve
Light Curve
Y(II), Y(NPQ), Y(NO)
Y(II), NPQ, qL
Fig. 43: Program/Clock Settings
80
Touchscreen Operation
Off
1:00






SET
X
EXIT
-2 -1
s .
Side Panel
ON/OFF, actinic light
switch.


, . Up/down
keys move cursor.
SET. Open submenu
() or select setting. To
change parameter value,
use up/down keys.
EXIT. Return to Main
Menu.