DELTA DORE CS 8000 TYXAL+ User Manual
  1. Manuals
  2. Brands
  3. DELTA DORE Manuals
  4. Security System
  5. CS 8000 TYXAL+
  6. User manual

DELTA DORE CS 8000 TYXAL+ User Manual

Hide thumbs Also See for CS 8000 TYXAL+:
Table of Contents

Advertisement

Quick Links

Download this manual
CS 8000 TYXAL+
www.deltadore.com
Alarm system
EN
User guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CS 8000 TYXAL+ and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for DELTA DORE CS 8000 TYXAL+

Summary of Contents for DELTA DORE CS 8000 TYXAL+

  • Page 1 CS 8000 TYXAL+ www.deltadore.com Alarm system User guide...

  • Page 2: Table Of Contents

    Warnings Contents We recommend you read this installation guide carefully before any use. 1. How does your alarm system work?....................6 1.1 Presentation ................................6 • The battery life specified is for normal use. 1.2 Products of the range..............................7 •...
  • Page 3 Contents 3.6 Zone management ..............................36 7. Associate home automation functions..................... 60 3.6.1 Assigning a product to a zone (1 to 8) ...................... 36 7.1 Associating a control system receiver (e.g. TYXIA 6410) ..................60 3.6.2 Naming the zone ............................36 7.2 Associating a roller shutter receiver (e.g.

  • Page 4: How Does Your Alarm System Work

    1. How does your alarm system work? 1.1 Presentation 1.2 Products of the range The alarm system is used to monitor a home by means of intrusion detectors (infrared, dual technology or door/window magnetic contacts, etc.) and technical defect detectors (smoke, water, mains power failure, etc.) Max.

  • Page 5: Home Automation Functions

    1. How does your alarm system work? 1.3 Home automation functions SEF TYXAL+ outdoor siren The loud sound of the siren will alert your neighbours in the The home automation functions are used to combine the "Alarm" application event of intrusion. with the other "Thermal"...

  • Page 6: X3D Wireless Transmission

    1.10 Standard EN 50131 Supervision The DELTA DORE alarm system complies with European standard EN 50131 and ensures quality and reliability for you: To ensure that all the system’s products are in working order, the range is permanently - EN50131-1, EN50131-3 Grade 2 monitored.

  • Page 7: Operation By Independent Zone

    1. How does your alarm system work? 1.11 Operation by independent • Pre-alarm zone zone Associated with a detector, the pre-alarm zone is used to dissuade intrusion attempts. The zones are used to protect part of the home. Example: An outside detector reports a presence to the The management of these zones is fully separate.

  • Page 8: Alarm Control Unit Installation

    2. Alarm control unit installation 3. Activation with a CLT 8000 TYXAL+ touch screen keypad TYXAL+ If you do not have a CLT 8000 touch screen keypad on your 2.1 Alarm control unit location installation, refer directly to Chapter 4. - On a flat surface, with enough space all around for installation and opening the battery cover.

  • Page 9: Maintenance Mode

    3. Activation with a CLT 8000 TYXAL+ touch screen keypad 3.2.3 Simplify the activation Maintenance mode is used to perform the activation, maintenance and diagnostic operations. • Deactivation of the maintenance mode signals 3.2 Maintenance mode The switch to maintenance mode automatically and briefly activates 3.2.1 Entering maintenance mode the indoor siren of the alarm control unit as well as a transmitter call cycle.

  • Page 10: Adding Products

    3. Activation with a CLT 8000 TYXAL+ touch screen keypad • The alarm control unit must be in maintenance mode. Briefly press the outer button (T1) of the transmitter. The TTRTC TYXAL+, TTGSM, transmitter beeps once when the button is pressed, then beeps •...

  • Page 11: Access Codes (Create - Change - Delete)

    3. Activation with a CLT 8000 TYXAL+ touch screen keypad 3.4 Access codes (Create - Change - Delete) 3.4.2 Creating or changing a code from the installer code 3.4.1 General Ê Enter the installer code (123456, by default) and confirm with OK. Ë...

  • Page 12: Changing A User Code From The User Code

    3. Activation with a CLT 8000 TYXAL+ touch screen keypad 3.4.4 Changing a user code from the user 3.5.3 Download code The keypad is updated automatically. This menu allows you to force a download to update the touch Ê Enter the user code and confirm with OK. screen keypad instantly with the information stored by the control unit (for example, following a series of Ë...

  • Page 13: Naming The Products

    3. Activation with a CLT 8000 TYXAL+ touch screen keypad 3.5.5 Naming the products The following table shows the product functions that can be personalised by the touch screen keypad (menu: Installation > Products > Configure). Ê Enter the installer code (123456, by default) and confirm with OK. 25/11/14 12:48 Access code...

  • Page 14: Activate/Deactivate Tamper Alarm

    3. Activation with a CLT 8000 TYXAL+ touch screen keypad 3.5.6 Activate/deactivate tamper alarm 3.5.9 Button beeps Reminder: To guarantee NF&A2P certification, the tamper alarm Ê Enter the installer code (123456, by default) and confirm with OK. must be activated. Ë...

  • Page 15: Sound Levels

    3. Activation with a CLT 8000 TYXAL+ touch screen keypad 3.5.13 Sound levels 3.5.14 Exit time for the installation This is the time between activating the system (ON) and the time Setting the sound levels applied to the CS 8000 TYXAL+ alarm when the intrusion detectors are genuinely enabled.

  • Page 16: Confirmation On/Off

    3. Activation with a CLT 8000 TYXAL+ touch screen keypad 3.5.16 Confirmation ON/OFF 3.5.18 Anti-jamming The Confirmation ON/OFF function is used to defer activations The anti-jamming function is used to trigger an intruder alarm or deactivations of the system for a short cycle if there is any wireless jamming attempt on the installation time.

  • Page 17: Call Numbers

    3. Activation with a CLT 8000 TYXAL+ touch screen keypad 3.5.20 Call numbers 3.5.21 Remote monitoring A fuller description of the remote monitoring settings is available If a transmitter is present on the installation, you must programme the numbers that will be called in the event of an in the installation guide of the telephone transmitter.

  • Page 18: Incoming Calls

    3. Activation with a CLT 8000 TYXAL+ touch screen keypad 3.5.22 Incoming calls 3.5.24 Maintenance call A call cycle is triggered each time the system is switched Incoming calls are calls made from a to maintenance mode. This menu allows you to disable this telephone to your telephone transmitter.

  • Page 19: Zone Management

    3. Activation with a CLT 8000 TYXAL+ touch screen keypad 3.6 Zone management 3.6.3 Viewing the zones 3.6.1 Assigning a product to a zone (1 to 8) This menu is used to check the list of products associated with a zone. Only the detectors and access codes can be associated with an operating zone (up to 8 separate zones).

  • Page 20: Deleting A Zone

    3. Activation with a CLT 8000 TYXAL+ touch screen keypad 3.6.5 Deleting a zone 3.6.7 Creating a common zone The common zone is directly dependent on the status of the • A zone can only be deleted if it has no associated product. other zones.
  • Page 21 3. Activation with a CLT 8000 TYXAL+ touch screen keypad 3.7 Door chime function 3.8 Testing the installation 3.8.1 Test a detector (DO, MDO, DOI PVC, The door chime function is used, by associating it with a door/ window DOS, DMB, DMBD, DMBV, DME, DMBE, DVR magnetic contact, to set off a particular tone if a presence is TYXAL+ ) detected (e.g.
  • Page 22 3. Activation with a CLT 8000 TYXAL+ touch screen keypad 3.8.3 Testing a DCP TYXAL+ impact detector or a DCS TYXAL+ , DF or DU detector Ê Set the control unit to maintenance mode (see "Maintenance mode" chapter). Ë On the detector: DCP TYXAL+ impact - Press the TEST button on the transmitter.
  • Page 23 3. Activation with a CLT 8000 TYXAL+ touch screen keypad 4. Activation without a CLT 8000 TYXAL+ touch screen keypad 3.9 Activating/Deactivating a product 4.1 Activating for the first time A product can be deactivated locally with a CLT 8000 TYXAL+ touch screen keypad or remotely via a telephone Ê...
  • Page 24 4. Activation without a CLT 8000 TYXAL+ touch screen keypad 4.2 Maintenance mode 4.2.2 Exiting maintenance mode Maintenance mode is used to perform the activation, maintenance and diagnostic operations. • The products must be closed (no tamper alarm in progress). The alarm control unit is switched to Maintenance mode by a control device: keypad (apart from outdoor keypad), remote •...
  • Page 25 4. Activation without a CLT 8000 TYXAL+ touch screen keypad 4.3.3 Step 3: Confirm on the product to be associated 4.3 Adding a product • Before switching the alarm control unit to maintenance mode, the system must be deactivated (OFF). TL 2000 TYXAL+ •...
  • Page 26 4. Activation without a CLT 8000 TYXAL+ touch screen keypad 4.4 Access codes (Create - Change - Delete) Briefly press the outer button (T1) of the transmitter. The TTRTC TYXAL+ , TTGSM, transmitter beeps once when the button is pressed, then beeps TYDOM 2.0 telephone again to confirm the association.
  • Page 27 4. Activation without a CLT 8000 TYXAL+ touch screen keypad 4.4.3 Changing an access code 4.4.5 Deleting all access codes With this operation, all the "user" codes are deleted and the Ê Enter the installer code (by default: 123456). "installer" code is set to its default value (123456). Ë...
  • Page 28 4. Activation without a CLT 8000 TYXAL+ touch screen keypad 4.6 Zone management 4.6.2 Assigning a product to a zone (1 to 2) from a TL 2000 TYXAL+ remote control 4.6.1 Assigning a product to a zone (1 to 8) from a CLS 8000 TYXAL+ simple keypad To control zones 1 or 2, buttons 1 or 2 of the remote control must be configured in "Mode A"...
  • Page 29 4. Activation without a CLT 8000 TYXAL+ touch screen keypad 5. Configuring a CLE 8000 TYXAL+ outdoor keypad Before using your keypad, you must: 4.7 Testing the installation • If it controls the alarm system, associate it with the alarm control unit (see § Adding a product). Once started, the Test mode of a detector lasts for 4 minutes.
  • Page 30 6. Configuring a TL 2000 TYXAL+ remote control 6.2 Associating buttons 1 and 2 with Deactivation You can activate or deactivate the alarm system with the Activation the alarm remote control. a control system receiver Depending on the configuration defined with your installer, buttons 1 and 2 can be programmed and have Button 1 Button 2...

  • Page 31: Associating A Control System Receiver (E.g. Tyxia 6410)

    7. Associate home automation functions 7.1 Associating a control system receiver (e.g. TYXIA 6410) 7.3 Associating a Rollia wireless roller shutter motor • You want to delay the alarms, status of the system or the 7.3.1 You want the roller shutters to close automatically when the alarm system operations for activating or deactivating the system via an offset lighting: is switched on - Step 1: Associate the control unit with the motor...

  • Page 32: Associating A Rep Tyxal+ Repeater

    8. Associating a REP TYXAL+ repeater 9. Deleting products Used when wireless propagation can be affected (distance, disrupted 9.1 From the CS 8000 TYXAL+ alarm control unit environment, nature of partitions, etc.), it can repeat the radio signal to remote products. 9.1.1 Delete the control devices If the repeater is already associated with the alarm control unit, go directly to step 2.

  • Page 33: From A Clt 8000 Tyxal+ Touch Screen Keypad

    9. Deleting products 10. Restoring factory settings (Initialisation) 9.2 From a CLT 8000 TYXAL+ touch screen keypad 10.1 Initialising the CS 8000 TYXAL+ alarm control unit 9.2.1 Deleting a product This operation deletes all the wireless associations and access codes. The settings are set to their default value. Ê...

  • Page 34: Initialising A Cle 8000 Tyxal+ Outdoor Keypad

    10. Restoring factory settings (Initialisation) 10.6 Initialising a CLE 8000 TYXAL+ outdoor keypad 10.9.2 Full initialisation of the transmitter 10.6.1 Deleting the association with the alarm system This operation deletes the associations, the faults in progress and the access code (set to its default value). This operation deletes the association of the keypad with the alarm control unit.

  • Page 35: Summary Of Leds, Buttons And Audible Signals

    11. Summary of LEDs, buttons and audible signals 11.3 Audible signals The alarm control unit can only be opened if it is in maintenance mode (or without any association), LED A Conditions Signal type otherwise a tamper alarm will be triggered. "Ding Dong"...

  • Page 36: Replacing The Batteries

    - Touch screen keypad set to average brightness available in the Delta DORE catalogue: DELTA DORE DELTA DORE shall not be held liable for an premature Relevant product or products Description wear on the batteries due to any use not compliant with the one described above.
  • Page 37 13. Troubleshooting This section is intended to help you quickly solve the most common problems that you may encounter with your alarm system when installing or using it. The alarm control unit refuses to exit Monitoring problem All the events can be viewed in the Histories menu. Maintenance mode If in doubt, if the problem persists or if it is not in this list, please contact our customer service:...
  • Page 38 14. Technical characteristics CS 8000 TYXAL+ siren alarm control unit CLT 8000 TYXAL+ touch screen keypad - Power supply: Lithium battery unit 3.6 V/26 Ah - Power supply: Lithium battery unit - LS 14500 - 3 x 3.6 V/7.8 Ah - Class III insulation - Class III insulation - Stand-by consumption 10 µA max.
  • Page 39 Delta Dore hereby declares that the equipment complies with the essential requirements and other rele- vant provisions of R&TTE directive 1999/5/EC. The CE conformity declaration for this equipment is available on request from: Service “Infos techniques” DELTA DORE - Bonnemain - 35270 Combourg (France) E-mail: info.techniques@deltadore.com...

Table of Contents