Selecting The Automatic Operating Mode - Samsung AVMDC072CA0 Owner's Instructions Manual

Selecting the Automatic Operating Mode

In the Automatic mode, the room temperature and the fan speed are
controlled automatically.
1 If necessary, press
Result: : The On/Off indicator on the wired remote controller comes on.
The air conditioner runs in the mode selected when
the unit was last used.
IMPORTANT The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
Plugged in
Stopped
lt will start up normally after three minutes.
2 To select the AUTO mode, press the Mode button until
at the top of the wired remote controller.
Result: : The air conditioner runs in AUTO mode.
N N N N o o o o t t t t e e e e You can change modes at any time.
3
To adjust the temperature, press the Temperature buttons one or more times
until the required temperature is displayed. Possible temperatures are
O O
between 18 C and 30 C inclusive.
Result: Each time you press Temperature buttons:
- The temperature is adjusted by 1
The air conditioner starts cooling, provided that the room
temperature is higher than the selected temperature.
The quantity of air is adjusted automatically.
(ON/OFF) button.
O
C.
is displayed
21
E-