Removing Excess Humidity - Samsung AVMDC072CA0 Owner's Instructions Manual

Removing Excess Humidity

16
E-
If the atmosphere in your room is very humid or damp, you can
remove excess humidity without lowering the room temperature too
much.
1 If necessary, press (ON/OFF) button.
Result: The On/Off indicator on the receiver & display unit comes on.
The air conditioner runs in the mode selected when
the unit was last used.
The receiver & display unit beeps.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
Plugged in
Stopped
lt will start up normally after three minutes.
2
To select the DRY mode, press the Mode button until
at the top of the wireless remote controller.
Result: The receiver & display unit beeps.
The air conditioner runs in DRY mode.
You can change modes at any time.
N N N N o o o o t t t t e e e e
3
To adjust the temperature, press the Temperature buttons one or more
times until the required temperature is displayed. Possible temperatures
O
are between 18 C and 30
Result: Each time you press Temperature buttons:
- The temperature is adjusted by 1
- The receiver & display unit beeps.
The air conditioner starts removing the excess humidity.
The quantity of air is adjusted automatically.
N N o o t t e e In the dry mode, the fan speed is controlled automatically.
N N o o t t e e
O
C inclusive.
O
C.
is displayed