Removing Excess HumiditY
If the atmospherc in your room is very humid or damp. you oan rcmove
exess humidity without lowertng the rcom ternperature too much'
Romoto Con0ol
Conrol Panel
1
lf necessary, press the 1) (On/Off) button.
Result: I
The air conditioner starts up in the Cool mode'
o The unit beePs.
(-
The air conditioner is fitted with a protection mechanism to
pre-
vent the unlr rrom Deing damaged when it is started immediately
after being:
t
Plugged in
a StoPPed
It will begin to cool after three minutes'
2
lf the lemperature is not displayed on the control panel:
I Press the CE)
button on the remote control
AI
o press the GFI
button on the unit one or more times until 3 is displayed
Resuli: a The unit beeps each time you press the
(D
I GFI uutton'
<) The air conditioner starts up in the Cool mode
3 To adjust the temperature, press the f-f-lorE)
buttons one or
moreiimes until the required temperature is displayed'
The temoerature can be set between 64"F and 86'F'
Result: O Each time you press the m-lor
f-?-lbuttons:
- The temperature is adjusted by 1"F
- The unit beeps
I
The air conditioner starts removing the€xcess humidity;
ths quality of air is adjusted automatically'
4
To control the direction of the air flow refer to page 11