Haier AB25S2SC1FA Service Manual page 167

(3) Press Time key for 5s to enter clock setting function. It
will show after powering on (if not
powering on, clock time is the memorized time), with clock
icon and minute-place
adjusted. Press Up/Down key to adjust
minute-place with of clock icon and no
minute-place. Press Time key to shift to hour-place, and then
press Up/Down key to adjust hour-place with
icon and no of hour-place. After adjustment,
clock icon and hour-place will
and clock icon and time will display statically.
(4) Clock time adjustment: when adjusting time, press
time to reduce one minute/hour while press
one minute/hour. Keep pressing
adjustment, with 2 times/s change after 1 s, 10 times/s change
after 5s. After 10s, it will change by 10 minutes and frequency
is 10 times/s.
(5) In the process of time adjustment, if there is no operation
for 10s, it will quit and restore previous state.
(6) In the process of time adjustment, press ON/OFF key to
quit clock setting function and execute turning on/off operation
at the same time.
(7) When setting timer or sleeping function, clock time cannot
be adjusted. If press Time key for 5s to enter clock adjustment,
clock icon and clock time will
adjusted.
Timer Function
(1) Timer mode setting: Timer ON, Timer OFF, Timer ON/OFF.
(2) Default: Timer ON is
(3) Precision: The time precision is 1 minute. Timer clock is
based on the current clock time; the adjustment is the same as
clock time.
(4) Press timer key, the timer function circulation is as follows:
, ON and the Hour position are
, ON and the Minute position are
, OFF and the Hour position are
, OFF and the Minute position are
, ON and the Hour position are
, ON and the Minute position are
, OFF and the Hour position are
, OFF and the Minute position are
timer icon will disappear.
time of
meaning current time can be
of
of clock
and press key to
one
one time to add
or key to accelerate time
indicating time cannot be
, Timer OFF is .
① the hour or minute position is
the timer, Keep pressing to accelerate the adjusting speed,
then to the setting.
② The controller will judge the order of timer on and off and
use the arrow to show the order. First ON then OFF:ON→OFF,
First OFF then ON:ON ←OFF.
③ The ON/OFF button has no affection on timer setting. Under
power off state, the Timer key is valid.
Timer Setting Cancellation
(1) If there is no Time key related operation for 10s, this setting
will be cancelled and the timer will come back to the previous
state.
(2) Press Time key, until the timer icon disappear,the time
function will cancel.
(3) Relation to other buttons when timer is set.
Press the key or
press them again to operate the function accordingly; Press
the (ON/OFF) key can exit the timer setting and power
ON/OFF directly. If there is a timer before, the wired controller
will operate by following the previous setting. If not, the wired
controller will have no timer operation.
Swing
(1) If Sw5 is on, only the Up/Down swing will be involved in
function circulation. At this time SW7 is invalid.
(2) If Sw5 is off, swing type can be set by Sw7, when Sw7 is
off, only Up/Down swing valid, when Sw7 turns on, Up/Down
and Left/ Right swing valid. Only Up/Down swing is default.
① If Sw7 is off (default): only Up/Down swing is available.
Press SET key to enter function circulation, Up/Down swing
icon then press SET key again to
icon statically displaying. If swing function is set, execute the
above operation to cancel.
② If Sw7 is on: Up/Down swing and Left/Right swing are
available.
Press SET key to enter function circulation, Left/Right swing
icon then press Up/Down key to enter Up/Down
swing, with Up/Down swing icon
when swing icon to
display. If swing function is set, execute the above operation to
cancel.
③ If connecting to the salve wired controller, Sw7 dip code of
master and slave wired controllers should be set the same and
should match the actual wired controller unit.
165
press to adjust
key to exit the current setting,
with swing
Press SET key again
with swing icon statically