Table of Contents
Advertisement
Item
A
LOCAL SITE
NUMBER
Item
B
IP ADDR
Item
C
MASK
Item
D
GATE
Item
E
PRIORITY LEVEL
50
Function
Assigns a site number to the local site.
To assign a desired site number,
1)
Move the cursor to the entry;
2)
Enter the site number (1-64) on the numeric keypad;
3)
Press the ACK key to confirm.
Function
Sets the IP address of the local site.
Note
The IP address is defaulted as "192.168.000.000". Please well plan your network structure
before setting a new IP address.
To set a desired IP address for the local site,
1)
Move the cursor to the first entry of the item;
2)
Enter the first three digits of the 12-digit IP address, and press the ACK key;
3)
Enter the second three digits of the 12-digit IP address, and press the ACK key;
4)
Enter the third three digits of the 12-digit IP address, and press the ACK key;
5)
Enter the last three digits of the 12-digit IP address, and press the ACK key.
Function
Sets the subnet mask for the local site.
Note
The subnet mask is defaulted as "255.255.255.000". Please well plan your network structure
before setting a new subnet mask.
To set a new subnet mask for the local site,
Move the cursor to the first entry of the item;
Enter the first three digits of the 12-digit subnet mask, and press the ACK key;
Enter the second three digits of the 12-digit subnet mask, and press the ACK key;
Enter the third three digits of the 12-digit subnet mask, and press the ACK key;
Enter the last three digits of the 12-digit subnet mask, and press the ACK key.
Function
Sets the gateway IP address for the local site.
Note
The gateway address is defaulted as "192.168.000.000". Please well plan your network
structure before setting a new gateway IP address.
To set a desired IP address for gateway,
1)
Move the cursor to the first entry of the item;
2)
Enter the first three digits of the 12-digit IP address, and press the ACK key;
3)
Enter the second three digits of the 12-digit IP address, and press the ACK key;
4)
Enter the third three digits of the 12-digit IP address, and press the ACK key;
5)
Enter the last three digits of the 12-digit IP address, and press the ACK key.
Function
Assign an appropriate priority of the remote site to control the local site
To define the priority level
1)
Move the cursor to the entry;
2)
Enter the priority level number (1-8) on the numeric keypad;
3)
Press the ACK key to confirm.
Note
Level 8 (default) is the highest level, and Level 1 is the lowest.
A higher level can inherit the functions permitted for its lower levels.
Advertisement
Table of Contents
