Selecting The Automatic Operating Mode - Samsung AP500PF Owner's Instructions & Installation Manual

Selecting the Automatic Operating Mode

10
E-
You can start the air conditioner in AUTO mode.
1 If necessary, press the ON/OFF(
N
Result: The power indicator on the control panel comes on.
N
The indoor unit beeps twice.
N
The operation mode previously set is displayed.
N
The air conditioner starts up in the mode selected
when the unit was last used.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
N
Switched on
N
Stopped
It will start up normally after a three-minute rest period.
2 If the AUTO COOL indicator is not displayed, press MODE button one
or more times until it appears.
N
Result: The indoor unit beeps each time you press MODE.
N
The air conditioner starts up in AUTO mode.
To operate the unit by remote control, press the AUTO COOL button.
N N o o t t e e In AUTO mode, the optimum fan speed is selected automatically
N N o o t t e e
and cannot be changed.
N
You can change modes at any time.
3
To control the air flow direction when necessary, refer to page 14.
) button.