Changing The Room Temperature Quickly - Samsung AP500PF Owner's Instructions & Installation Manual

Changing the Room Temperature Quickly

Remote control
12
E-
The turbo function is used to cool your room as quickly as possible.
Example: You have just come home and find that the room is very hot.
You wish to cool it down as quickly as possible.
The turbo function operates for 30 minutes with the maximum
settings before returning automatically to the mode and
temperature previously selected.
The turbo function can be controlled by using remote control.
1 If necessary, press the ON/OFF(
N
Result: The power indicator on the control panel comes on.
N
The indoor unit beeps twice.
N
The operation mode previously set is displayed.
N
The air conditioner starts up in the mode selected
when the unit was last used.
IMPORTANT
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
N
Switched on
N
Stopped
It will start up normally after a three-minute rest period.
2
Check to see whether the operation mode is positioned at
"AUTO COOL" or "COOL" ; the turbo operation cannot be selected
when the unit is in the "FAN" operation mode.
3
Press the TURBO button on the remote control.
N
N N o o t t e e The tempeature and fan setting are adjusted automatically.
N N o o t t e e
N
The TURBO indicator on the control panel comes on.
N
The air conditioner cools the room as quickly as possible.
N
After 30 minutes, the air conditioner is reset automatically to the
previous mode, temperature and fan settings.
4
If you wish to stop the Turbo function before the end of the 30-minute
period, press the TURBO button again.
N
Result: The air conditioner is reset automatically to the
previous mode.
5
To control the direction of the air flow, refer to page 14.
) button.