Table of Contents
Advertisement
CONTROLS
1.
Fold the seat backrest forwards if neces-
sary.
2.
Pull up the head restraint as far as it will
go.
3.
Press the button, arrow 1, and pull the
head restraint fully out.
Installing
Proceed in the reverse order to install the
head restraint.
Rear head restraints
Safety notes
WARNING
If the head restraints are removed or in-
correctly adjusted, they cannot provide
protection as intended and head and neck
injuries may result. There is a danger of
injury.
–
Before a journey, re-install any re-
moved head restraints on all occupied
seats.
–
Adjust the head restraint so its centre
supports the back of the head at as
close to eye level as possible.
–
Adjust the distance so that the head
restraint is as close as possible to the
back of the head. Set the distance via
the backrest tilt as needed.
86
Seats, mirrors and steering wheel
Online Edition for Part no. 01402988211 - II/18
WARNING
Parts of the body can become trapped
when the head restraints are moving.
There is a danger of injury. When moving
the head restraint, make sure that the area
of movement is kept clear.
WARNING
Objects on the head restraint reduce the
protective effect in the head and neck
area. There is a danger of injury.
–
Do not fit any covers on the seats or
head restraints.
–
Do not hang objects such as coat
hangers directly on the head re-
straint.
–
Only use accessories that have been
classified as safe for attaching to the
head restraint.
–
Do not use any accessories, for exam-
ple cushions, during the journey.
To adjust the height
–
Downwards: press the button, arrow 1,
and slide the head restraint downwards.
–
Upwards: push head restraint upwards.
After setting the height, move the head re-
straint up or down slightly, making sure it
engages properly.
Hide quick links:
Advertisement
Chapters
Table of Contents
