Mini COUNTRYMAN 2018 Owner's Handbook Manual page 177

Faster desired speeds can also be selected if
distance control is switched off, see
page 179.
Switching the Cruise Control on/off
and interrupting
Switching on
Press the button on the steering
wheel.
Display in the instrument cluster il-
luminates.
Display in the instrument cluster il-
luminates. The current speed is ac-
cepted as the desired speed and
shown on the symbol.
Cruise Control is active and holds the set
speed.
Dynamic Stability Control DSC is switched
on, if necessary.
Switching off
With the Stop&Go function and Steptronic
transmission: when switching off with the
vehicle at a standstill, depress the brake
pedal at the same time.
Press the button on the steering
wheel.
The displays turn off. The saved desired
speed is deleted.
Interrupting manually
Press the button on the steering
wheel.
With the Stop&Go function and Steptronic
transmission: if you interrupt the system
when the vehicle is at a standstill, depress
the brake pedal at the same time.
Online Edition for Part no. 01402988211 - II/18
Driving comfort
Interrupting automatically
The system interrupts automatically in the
following situations:
– If the driver applies the brakes.
– Manual gearbox: if the clutch is pressed
for a few seconds or released with no
gear engaged.
– If selector lever position N is engaged.
– If Dynamic Traction Control DTC is acti-
vated or Dynamic Stability Control DSC
deactivated.
– If Dynamic Stability Control DSC inter-
venes.
– If the detection zone of the camera is
disrupted, for example, due to dirt,
heavy rainfall or dazzling by the sun.
– Manual gearbox: if the vehicle in front
brakes at speeds below approx. 30 km/h,
approx. 20 mph.
– With the Stop&Go function and Step-
tronic transmission: after a stationary
period of approximately 3 seconds, if the
vehicle was decelerated by the system
to a standstill.
Setting the speed
Holding or setting the speed
Press the
tem is interrupted.
If the system is switched on, the current
speed is maintained and saved as the de-
sired speed.
The saved speed is shown on the
symbol.
Dynamic Stability Control DSC is
switched on, if necessary.
Changing the speed
or button: press repeatedly until the
desired speed is set.
CONTROLS
or button while the sys-
177