Table of Contents
Advertisement
CONTROLS
When zooming in, remember that the view
might no longer show certain obstacles.
Parking with the help of driving
path and turning circle lines
1.
Position the vehicle so that the turning
circle lines are within the boundaries of
the parking space.
2.
Turn the steering wheel so that the driv-
ing path line covers the corresponding
turning circle line.
Display settings
Brightness
With rearview camera switched on:
1.
Select the symbol.
2.
Turn the Controller until the desired set-
ting is reached and press the Controller.
190
Driving comfort
Online Edition for Part no. 01402988211 - II/18
Contrast
With rearview camera switched on:
1.
Select the symbol.
2.
Turn the Controller until the desired set-
ting is reached and press the Controller.
System limits
Detection of objects
Very low obstacles or higher, protruding ob-
jects such as ledges may not be detected by
the system.
Depending on the equipment installed,
some assistance functions also consider
Park Distance Control PDC data.
Observe the notes in the chapter on Park
Distance Control PDC.
The objects shown on the Control Display
may be closer than they appear. The dis-
tance to objects is therefore not estimated
on the display.
Park Assistant
Principle
The system supports you when parking par-
allel to the road.
General
Operation of the Park Assistant is divided
into three steps:
Hide quick links:
Advertisement
Chapters
Table of Contents
