Mini COUNTRYMAN 2018 Owner's Handbook Manual page 183

Switching off
Press the button on the steering
wheel.
The displays turn off. The saved desired
speed is deleted.
Interrupting manually
When the system is activated, press
the button on the steering wheel.
Interrupting automatically
The system interrupts automatically in the
following situations:
– If the driver applies the brakes.
– If the clutch is pressed for a few seconds
or released with no gear engaged.
– If too high a gear has been engaged for
the speed.
– If selector lever position N is engaged.
– If Dynamic Traction Control DTC is acti-
vated or Dynamic Stability Control DSC
deactivated.
– If Dynamic Stability Control DSC inter-
venes.
Setting the speed
Holding or setting the speed
Press the or
tem is interrupted.
If the system is switched on, the current
speed is maintained and saved as the de-
sired speed.
The saved speed is shown in the instrument
cluster.
Dynamic Stability Control DSC is switched
on, if necessary.
button while the sys-
Online Edition for Part no. 01402988211 - II/18
Driving comfort
Changing the speed
or button: press repeatedly until the
desired speed is set.
If the system is active, the displayed speed
is stored and the vehicle reaches the stored
speed when the road is clear.
– or button: every time it is
pressed to the resistance point, the de-
sired speed is increased or decreased by
approximately 1 km/h, approximately
1 mph.
– or button: each time the button is
pressed beyond the resistance point, the
desired speed changes to the next multi-
ple of 10 km/h on the speedometer dis-
play.
– or button: pressing up to the re-
sistance point and holding it there accel-
erates or decelerates the vehicle without
the accelerator pedal being pressed. The
speed is maintained after letting go of
the switch. Pressing beyond the resist-
ance point accelerates the vehicle more
rapidly.
Resuming Cruise Control
General
If Cruise Control is interrupted, it can be re-
sumed by calling up the saved speed.
Before calling up the saved speed, make
sure that the difference between the cur-
rent speed and the saved speed is not exces-
sively large. Otherwise, there may be inad-
vertent braking or acceleration.
Resuming a saved speed
Press the button on the steering
wheel.
The saved speed is resumed and main-
tained.
CONTROLS
183