Mini COUNTRYMAN 2018 Owner's Handbook Manual page 69

When the vehicle is unlocked with a remote
control, the allocated driver profile is activa-
ted. All the settings saved in the driver pro-
file are applied automatically.
If several drivers each use their own remote
control, the vehicle will adapt to their per-
sonal settings when it is unlocked. These
settings are also restored if the vehicle is
used in the intervening period by someone
with a different remote control.
Changes to settings are saved automatically
in the currently used driver profile.
Operating requirements
To ensure that the correct driver profile can
be set, the system must be able to assign
the detected remote control uniquely to the
driver.
This is assured if the following conditions
are met:
– The driver is only carrying their own re-
mote control.
– The driver unlocks the vehicle.
– The driver enters the vehicle through
the driver's door.
Settings
Settings for the following systems and func-
tions are saved in the active profile. Which
settings can be saved depends on the coun-
try and equipment.
– Unlocking and locking.
– Lights.
– Radio.
– Instrument cluster.
– Favourites buttons.
– Volumes, sound.
– Control Display.
– Air conditioning.
– Park Distance Control PDC.
– Rear-view camera.
Opening and closing
Online Edition for Part no. 01402988211 - II/18
– MINI Driving Modes.
– Intelligent Safety.
– Driver's seat position, exterior mirror
position.
The positions set via the seat memory
and the last position set are saved.
System limits
It is not always possible to assign a remote
control uniquely to a driver. This may be the
case in the following scenarios:
– The front passenger unlocks the vehicle
with their remote control, but another
person drives.
– The driver unlocks the vehicle using
Comfort Access and is carrying a num-
ber of remote controls.
– If there is a change of driver without the
vehicle being locked and unlocked.
– If a number of remote controls are loca-
ted in the area outside of the vehicle.
Settings
General
Various settings are possible for opening
and closing, depending on the equipment
installed and the country specifications.
These settings are saved for the currently
used driver profile, see page 68.
Unlocking
Doors
Using the on-board monitor:
1. "My MINI"
2. "Vehicle settings"
3. "Doors/Key"
CONTROLS
69