Main Section - Samson S63, S83 Manual

Guided Tour - S63 Main Section
1
2
3
5
6
0
+10
RETURN 1-2
0
+10
30Hz 64Hz 125Hz 250Hz 500Hz
MONITOR
10
0
REVERB
30Hz 64Hz 125Hz 250Hz 500Hz
0
+10
MAIN LEVEL
PHANTOM
7
1: Return 1-2 Level (green) - This knob determines the input level of signal
arriving via Effects returns 1 and 2 (mixed together in mono). This signal is at
unity gain (no boost or attenuation) when the knob set to the 0 position and is
boosted when the knob is turned to the right of 0 and attenuated when turned to
the left of 0. For information on how to properly set this, see the sections in this
manual entitled "Setting Up and Using the S83/S63" and "Using the Effects
Sends and Returns."
2: Monitor Level (green) - This knob determines the overall level of the signal
being output from the rear panel Monitor jack. The amount of signal sent is
increased as the knob is turned clockwise. For more information, see the "Using
the Effects Sends and Returns" section in this manual.
3: Reverb Level (green) - This knob determines the level of the return signal
from the internal reverb unit. The amount of incoming reverb signal is increased
as the knob is turned clockwise. For more information, see the "Using the
Effects Sends and Returns" section in this manual.
4
1K
1K
PEAK PROTECTION POWER
8 9
12
3K 5K 10K
2K
10K
3K 5K
2K
CD/TAPE
IN
LEFT RIGHT
10
11
+15dB
0dB
-15dB