Introduction 3 Servo Quad Amplifier Features 4 Guided Tour 5 Front Panel 5 Rear Panel 6 Setting Up and Using the Servo Quad Amplifier 7 The Servo Quad Amplifier Protection Circuitry 8 Bridge Stereo Mode 9 Bi-amplification Applications 10 Appendix A: Linearity vs. Frequency Sweep 11 Appendix B: Power Output vs.
RCA-type input connectors Suggested applications for the Servo Quad Amplifier include: • Bi-amping applications - Because it is actually four amplifiers in one, the Samson Servo Quad Amplifier is particularly well-suited (in conjunction with appropriate crossover circuitry) to power small and medium size bi-amped speaker systems.
19" rack (taking just two rack spaces). • Three-year warranty. • Last but certainly not least, value. The Samson Servo Quad Amplifier has been designed from the ground up to deliver excellent yet affordable sound quality.
For a complete description of the conditions under which this light goes on, see the section entitled “The Servo Quad Amplifier Protection Circuitry” section on page 6 of this manual. 0 dB CLIP 100% SAMSON CH1/2 PROTECTION SERVO 4120 - 120 WATT X 4 AMPLIFIER -20 dB -10 dB -3 dB...
ONLY WITH SAME TYPE OF FUSE. USA & CANADA T 8A/125V (115V) FUSE EUROPE AND UK CH3 R T 6.3A/250V (230V) SERVO 4120 QUAD AMPLIFIER SERIAL NUMBER 4 120W SAMSON MAX. LOAD MONO 8 SAMSON TECHNOLOGIES CORP., U.S.A. BRIDGE CH2 L CH1 L...
If you encounter difficulty with any aspect of setting up or using your Servo Quad Amplifier, you can call Samson Technical Support (1-800-372-6766) between 9 AM and 5 PM EST.
The Servo Quad Amplifier Protection Circuitry As noted in the “Guided Tour” section of this manual, the Servo Amplifier's front panel Protection lights indicate the activity of the relay speaker connection circuitry. When the Protection lights are lit, this circuitry is inactive, and all CH3/4 connected speakers are muted (provided with 0 volts DC), thus protecting them and preventing any audible “thump”...
“On” position, the Servo Quad amplifier operates in bridge stereo mode, acting like a true stereo amplifier, delivering 120 watts of power per channel (in the case of the Servo Quad 4060 model) or 240 watts of power per channel (in the case of the Servo Quad 4120 model).
Of course, with four amplifiers at your disposal, you can use your Samson Servo Quad Amplifier to bi-amp both the left and right signals in a stereo system.
Specifications 1. Rated Output Power, per channel At 1 kHz, 4 ohm, .<0.05% THD+N Model 4120 Model 4060 At 1 kHz, 4 ohm, 1% THD+N Model 4120 Model 4060 At 1 kHz, 8 ohm, <0.05% THD+N Model 4120 Model 4060 At 1 kHz, 8 ohm, 1% THD+N Model 4120 Model 4060...
Page 14
Produced by On The Right Wavelength for Samson Technologies Corp. Copyright 1997, Samson Technologies Corp. Printed April, 1997 Samson Technologies Corp. 575 Underhill Blvd. P.O. Box 9031 Syosset, NY 11791-9031 Phone: 1-800-3-SAMSON (1-800-372-6766) Fax: 516-364-3888...
Need help?
Do you have a question about the 4060/4120 and is the answer not in the manual?
Questions and answers