Table of Contents
Advertisement
Chapter 5
Set Up the UEFI Utility
76
AMI Backup
Follow these steps to back up the system image.
1. Click the AMI Rescue menu to access the AMI Rescue screen.
2. Click AMI Backup.
3. Select the appropriate volume from the list.
'Recovery' is the volume name where the default backup of factory
images is stored.
IMPORTANT
IMPORTANT Any USB mass storage drive or eSATA hard disk drive must be
4. Click Next.
Rockwell Automation Publication 6177R-UM002E-EN-P - March 2017
Computers with the Windows Embedded 8.1 Industry Pro operating
system do not contain a factory image backup in the Recovery
partition.
formatted as FAT32, have a drive label other than 'Recovery,' and be
non-blank.
- Quick Links:
- Computers: Perform Step
Hide quick links:
Advertisement
Table of Contents
