Reinstall The Cover - Allen-Bradley 6177R-MM User Manual

Non-display industrial computers
Hide thumbs Also See for 6177R-MM:
Table of Contents

Advertisement

Reinstall the Cover

Follow these steps to reinstall the side cover for the 750R computer or the top
cover for the 1450R computer.
1. Verify that the computer is in the upright position.
2. Follow
step 1
through
3. Position the cover so its hinge tabs align and engage the lock slots on the
chassis (A).
Tilt the cover slightly to make sure that all hinge tabs are engaged and
locked properly.
4. Slide the cover forward to lock the hinge tabs into place (B).
5. Secure the cover to the computer chassis.
• 750R computers: Reinstall the three screws on the rear edge of the
side cover (C).
• 1450R computers: Reinstall the two screws on the rear edge of the
top cover (C).
6. Torque the screws to 0.6 N•m (5.2 lb•in).
A
A
Rockwell Automation Publication 6177R-UM002E-EN-P - March 2017
step 3
of the
Post-configuration on page
750R Computer
A
A
C
C
1450R Computer
Replace Components
Chapter 4
37.
B
C
B
C
C
B
B
39

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents