Chapter 5
Set Up the UEFI Utility
Firmware Configuration
54
You can view and modify the various system parameters from the Firmware
Configuration menu. On the left are six menu options that are stacked
vertically.
Menu
Main
Advanced
Chipset
Boot
Security
Save and Exit
Common Buttons at the Bottom of Screens
Most screens have these common buttons.
Button
Help
Default
Restore
Save
Previous (not shown)
Exit
Rockwell Automation Publication 6177R-UM002E-EN-P - March 2017
Description
Use this menu to view general computer information and for basic system
configuration.
Use this menu to configure information for the PXE, PCI, ACPI, processor, SATA,
USB, power, video graphics, super I/O, hardware display, and AMT.
Use this menu to configure system chipset information.
Use this menu to configure boot device priority.
Use this menu to set or change user and administrator passwords.
Allows you to save changes and reset, discard changes and reset, or restore
defaults.
Description
Click for general help on how to use the set-up utility.
Click to load the default values for all set-up options.
Click to restore all set-up options to previously saved values.
Click to save configuration changes.
Click to navigate to the previous page.
Click to close the set-up utility.