Cleaning Modes - Shark Rocket ZS350 Series Owner's Manual

(Click)
1. Insert wand into Zero-M™ Cleaner Head.
2. Insert handheld vacuum into wand.
Ensure all connections click securely into place.
s h a r kc l e a n . c o m
ASSEMBLY
1
(Click)
2
OFF
Slide switch to the bottom
to turn off power. To begin
vacuuming, slide switch to
the appropriate setting.
NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please use setting II, High Pile Carpets.
UPRIGHT
To clean floors place foot on cleaner
head and tilt handheld vacuum back.
ABOVE-FLOOR HANDHELD
Press the WAND RELEASE button and lift the
handheld vacuum off the wand. Great for cleaning
stairs and furniture.
NOTE: All accessories attach to either the wand or the handheld vacuum.
SETTINGS
SETTING I
Bare Floor/Area Rugs High Pile Carpets
The brushroll spins slowly The brushroll spins faster
to clean bare floors and to pick up debris below
delicate area rugs. the surface of your carpets.

CLEANING MODES

ABOVE-FLOOR WITH WAND
Stand the vacuum upright. Step on the foot pedal
on the bottom left side of the cleaner head and pull
the wand up to disconnect it. Great for cleaning
baseboards, ceiling fans, window sills, etc.
SETTING II
s h a r kc l e a n . c o m