Shark APEX ZS360C Quick Start Manual

MAINTENANCE
Brushroll/Soft Roller Access
1. To open the brushroll garage, slide both
release buttons on the floor nozzle away
from you, towards the back of the nozzle,
then lift off the lid.
2. To close the brushroll garage, insert
the 3 tabs on top of lid into the 3 slots in
the nozzle, then push down on both sides
of lid until it clicks securely into place. If
Brushroll Indicator Light isn't green and
headlights are flashing, check again that
both sides of lid are locked in place.
Brushroll Maintenance
With the garage lid removed, carefully
clear away any debris that may
be impeding the brushroll.
NOTE: If you see any hair wrapped
around the brushroll, continue cleaning,
using Setting II, Carpet, on bare floors.
This will allow Zero-M™ technology to
remove the hair wrap and send it to
the dust cup.
HAVING TROUBLE?
ISSUE
Vacuum lifts area rugs.
Solution
Turn off the unit to disengage the brushrolls
and restart with the Power button.
For questions or to register your product, visit us online at sharkclean.com
©2019 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC.
APEX, DUOCLEAN, and ZERO-M are trademarks of SharkNinja Operating LLC.
ZS360C_QSG_MP_E_Mv2
Empty the dust cup every time
debris reaches the MAX fill line.
Empty
Cleaning the Soft Roller
Lift out the Soft Roller by pulling the tab
on the right side. Clear away any debris,
then slide the Soft Roller back into place.
Checking the Nozzle for Blockages
Tilt neck of nozzle back to straighten the
airway, then remove any blockages.
ISSUE
Vacuum is not picking up debris. No suction
or light suction.
Solution
Empty dust cup, clean filters, check all
openings for blockages.
@sharkcleaning
Please be sure to read the enclosed Shark
APEX
™
Corded Stick Vac
ZS360C
QUICK
START
GUIDE
Use this Quick Start Guide
to start using your new
vacuum's great features.
Register your vacuum at
registeryourshark.com
For additional parts
and accessories, visit
sharkaccessories.com
®
Owner's Guide prior to using your unit.