Type Designation - ABB PST30 Installation And Maintenance Manual

3:4 Type designation

PST B 370-600 -70
3
3:4 Industrial
IT
Thanks to ABB's broad program of product standardisation, today's Industrial IT components are - whether they are products or systems, hardware or
software - the building blocks of larger solutions, incorporating functionalities that will allow seamless interactions in real-time automation and informa-
tion systems.
At the product level, ABB's Industrial IT enabled symbol ensures that all the products can fully interact. All product information pertaining to these
products is available in electronic format, based on Aspect Object
equipped with the tools necessary to install, operate and maintain it efficiently throughout the product's life cycle.
The PST softstarters is an Industrial IT enabled product. Documentation such as brochures, catalogues, certificates and drawings can be found at :
www.abb-control.com/products/softstarters.htm#type_pst.
3:6 Environmental influence
The product is designed to minimize the environmental affects during manufacturing and use of the product. Most of the materials used are recyclable.
3:7 Specifications
Item
Degree of protection (main circuit)
Operating position
Ambient temperature
Operation
Without derating
With derating
Altitude
Pollution degree
Relative humidity
Standards
PTC input
Marine approvals
3.4
1SXU 132 021 M0201
Chapter 3 - Description
Control Voltage
70 = 100 - 250V 50/60 Hz
Main Voltage
600 = 208 - 600V 50/60 Hz
690 = 400 - 690V 50/60 Hz
Current Rating
600 = 208 - 600V 50/60 Hz
690 = 400 - 690V 50/60 Hz
Bypass contactor
600 = 208 - 600V 50/60 Hz
690 = 400 - 690V 50/60 Hz
Softstarter type
TM
Specification
IP 10 for PST30...72; IP 00 for PST85...1050
Vertical at ± 10°
Storage: -25°C to +70°C (-13°C to 158°F)
0°C to +40°C (32°F to 104°F)
+40° C to +50°C (104°F to 122°F) of 0.8% / °C (1.8%/°F)
1000 m (3281 ft.) above sea level without derating
1000 - 4000 m (3281 - 13,123 ft.) by derating 1% for each 333 ft above 3300 ft.
3
5 - 95% (non-condensing)
UL508
IEC 60947-1
IEC 60947-4-2
EN 60947--1
IEC 60947-8 Mark A detectors, DIN 44081 and DIN 44082
Contact your ABB sales office
technology. The Industrial IT commitment from ABB ensures that every product is
Low Voltage Products & Systems
ABB nc. • 888-385-1221 • www.abb-control.com