Symbols; Safety Instructions; General Safety Instructions - Festool TXS Instruction Manual

Symbol Significance
Warning of general danger
Risk of electric shock
Read operating instructions and safety
notices!
Wear ear protection.
Wear protective gloves.
Wear a dust mask.
Wear protective goggles.
Tip or advice
Handling instruction
diameter
Max. chuck clamping
RBRC Seal - LiIon
Mains voltage (input) and frequency

General safety instructions

WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
1 WORK AREA SAFETY
a. Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
b. Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable

Symbols

Symbol Significance
V
A
Hz
~ a.c.
d.c. direct current
n
0
rpm
-1
min
°C
min.
Ah
kg
Wh

Safety instructions

liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c. Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
2 ELECTRICAL SAFETY
a. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet condi-
Voltage (output)
Rapid charging max.
Permitted temperature range
Safety class II
Charging times
Capacity
Weight
volts
amperes
hertz
alternating current
no load speed
revolutions per minute
degree Celsius
minutes
amps hour
kilograms
watt hour
7