Table of Contents
Advertisement
ROA 128 5068
POL SIP Evaluation Board
9
7
8
5
6
3
4
2
Fig 1.3b Connection of the Intersil ZLUSBREF02 PMBus-to-USB adapter
(connector is found on the back side of the ROA 128 5068 board)
1.2.1 Power-up instruction:
- Mount the BMR:s in the desired positions
- Connect and turn On the 5-14 V supply
- Turn RC switch in On position
▪
The LEDs should now give green light, (unless the
outputs of the BMRs are not configured to be disabled).
- Connect the PMBus Adapter/Cable to the board.
- Start the software program.
1.2.2 Power-down instruction:
- Turn RC switch in Off position or turn Off the 5-14V Supply
- Now, the BMR modules can be removed/replaced.
User Guide
1/28701-ROA 128 5068 Rev A
© Flex
9 NC
10 SDA
7 NC
8 DGND
5 NC
6 SALERT
3 NC
4 VI2C
1 NC
2 SCL
5
May 2018
Advertisement
Table of Contents
