Specifications; Five Year Limited Warranty - BLUE SKY SB3000i Installation And Operation Manual

12 volt 30/22 amp maximum power point tracking photovoltaic charge controller
Table of Contents

Advertisement

Blue Sky Energy – Solar Boost 3000i

Specifications:

Maximum PV Power:
Rated Battery (Output) Current:
Conversion Efficiency:
Power Consumption:
Recommended Max Panel Voc at STC:
Charge Profile:
Absorption Voltage:
Float Voltage:
Equalization Voltage (if enabled):
Auxliary Output (option A, B, or C):
Load (LVD) Disconnect/Reconnect Voltage:
Maximum Auxiliary Output current (option B or C):
Display:
Temperature Compensation (by optional Battery Temp. Sensor):
Operating Temperature:
Maximum Full Power Ambient:
Environmental Protection:
Weight:
Dimensions:
(*)
36-cell panels are typically referred to as "12V panels" providing Vmp/Voc of ~18V/22V at STC, 60-cell panels refers to "20V panels" (Vmp/Voc ~30V/37V), 72-cell
panels refers to "24V panels" (Vmp/Voc ~36V/44V) -
NB. As a part of our continuous improvement process specifications are subject to change without prior notice.

FIVE YEAR LIMITED WARRANTY

Blue Sky Energy, Inc. (hereinafter BSE), hereby warrants to the original consumer purchaser, that the product or any part thereof shall be free from
defects due to defective workmanship or materials for a period of five (5) years subject to the conditions set forth below.
1.
This limited warranty is extended to the original consumer purchaser of the product, and is not extended to any other party.
2.
The limited warranty period commences on the date the product is sold to the original consumer purchaser. A copy of the original purchase
receipt identifying purchaser and date of purchase, must accompany the product to obtain warranty repairs.
3.
This limited warranty does not apply to, and future warranty shall become void, for any product or part thereof damaged by; a) alteration,
disassembly or application of a foreign substance, b) repair or service not rendered by a BSE authorized repair facility, c) accident or abuse, d)
corrosion, e) lightning or other act of God, f) operation or installation contrary to instructions pertaining to the product, or g) cosmetic aging.
4.
If BSE's examination of the product determines that the product is not defective the consumer shall be charged a test and evaluation fee of
$30 and be responsible for all transportation costs and insurance related to returning the product to the consumer. The consumer is ultimately
responsible for proper installation and operation of the product and BSE's prior troubleshooting assistance shall not serve as a waiver of the
test and evaluation fee. The test and evaluation fee is subject to change without prior notice.
5.
If within the coverage of this limited warranty, BSE shall repair or replace the product at BSE's sole discretion and return the product via
standard ground transportation of BSE's choosing within the continental US. The consumer shall be responsible for all transportation costs and
insurance to return the product outside the continental US, and for all transportation costs and insurance related to expedited return of the
product. BSE's liability for any defective product or any part thereof shall be limited to the repair or replacement of the product. BSE shall not
be liable for any loss or damage to person or property, or any other damages, whether incidental, consequential or otherwise, caused by any
defect in the product or any part thereof.
6.
Any implied warranty for merchantability or fitness for a particular purpose is limited in duration to the length of this warranty.
7.
To obtain warranty repairs, contact BSE at 760-597-1642 or techsupport@blueskyenergyinc.com to obtain a Returned Goods Authorization
(RGA) number. Mark the outside of the package with the RGA number and return the product, postage prepaid and insured to the address
below. The consumer is responsible for all transportation costs and insurance related to returning the product to BSE, and for any shipping
damage which may void the warranty or increase the cost of repairs.
15
(1)
Factory default, programmable via digital display.
SB3000i @12V
400W with 36-cell PV panel
290W with 60-cell PV panel
30A with 36-cell PV panel
22A with 60-cell PV panel
97% (typical @28V / 24A output)
0.36W (typical standby)
40V (Max Panel Input 50V)
Multi-Stage plus Manual or Automatic Equalization
14.4V
13.2V
15.2V
A) Auxiliary Battery Charge 2A (2nd battery)
B) Load Control
C) Dusk-to-Dawn and PWM dimming
11.5V/12.6 V
20A
Yes
-5.00mV/°C/cell correct factor (Range 0.00 to -8.00mV/°C/cell)
-40°C – 45°C
45°C
IP20
1.08 lb. (493 g)
6.35 x 4.6 x 2.2" (16.1 x 11.7 x 5.6 cm)
Blue Sky Energy | USA |
(*)
(*)
(*)
(*)
(1)
(1)
(1)
(1)
(1)
(1)
www.blueskyenergyinc.com

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Solar boost 3000i mppt

Table of Contents