Connect More Than Two Computers With Ethernet Cables; Connect More Than Two Computers With Ethernet Cables; Connect Telephone Or Fax With Standard Analogue Phoneline; Connect Telephone Or Fax With Standard Analogue Phone Line - THOMSON ACG905-C User Manual

Connect More Than Two Computers with Ethernet Cables

If you want to create hard wired connections to the ACG for more than
two computers, you will need to purchase a Hub (Switch) for that purpose
and the cabling necessary for those additional connections. Although a
10BaseT Hub or Switch can be used, it is not recommended. A 100BaseT
Hub or Switch is recommended. Follow the installation guidelines that
accompany this equipment.

Connect Telephone or Fax with Standard Analogue Phoneline

When properly connected, most telephone devices can be used with the
Advanced Cable Gateway. Here is how to make that connection
Advanced
Cable
Gateway
Note:
There is only one TEL connection available on the rear panel of the
Gateway.
Note:
If you have any questions concerning telephone connection, please
contact your service provider.
analog
phone
Connect a standard phone line cord
directly from the phone (fax machine,
answering machine, caller ID box,
etc.) to the TEL port on the Gateway.
To make a normal telephone call,
pick up the handset; listen for a dial
tone, then dial the desired number
using this new connection. For
services such as call waiting, use
the hook switch (or FLASH button)
to change calls.
Connect Cables
15