Table of Contents
Advertisement
Connecting More Than Two Computers
to the Advanced Cable Gateway
If you want to create hard wired connections to the ACG for more than
two computers, you will need to purchase a Hub (Switch) for that purpose
and the cabling necessary for those additional connections. Although a
10BaseT Hub or Switch can be used, it is not recommended. A 100BaseT
Hub or Switch is recommended. Follow the installation guidelines that
accompany this equipment.
Telephone or Fax Connection
When properly connected, most telephone devices can be used with the
Advanced Cable Gateway. Here is how to make that connection
Advanced
Cable
Gateway
Note:
There is only one TEL connection available on the rear panel of the
AGC.
Note:
If you have any questions concerning telephone connection, please
contact your service provider.
analog
phone
Parts and Putting them Together
Connect a standard phone line
cord directly from the phone (fax
machine, answering machine, caller
ID box, etc.) to the TEL port on the
Advanced Cable Gateway.
To make a normal telephone call,
pick up the handset; listen for a dial
tone, then dial the desired number
using this new connection. For
services such as call waiting, use
the hook switch (or FLASH button)
to change calls.
27
Advertisement
Table of Contents
