Install The Gateway Battery; (Provides Power Should The Electricity Go Out) - THOMSON ACG905-C User Manual

Install the Gateway Battery

Should the electricity go out, this will provide backup power to the Gateway:
CAUTION:
batteries may damage the product and may be hazardous to health.
1. Ensure the power cord is unplugged.
Remove the battery cover on the
rear panel. There are two battery
compartments. One battery is included
with the Advanced Cable Gateway.
For an additional battery please contact
your local operator.
2. Push the slider up/down to allow for
battery insertion.
3. Insert the battery into the compartment
marked
"Battery 1".
4. Readjust the slider to prevent the battery
from moving and replace the battery
cover. Plug the power cord into an
electrical outlet that is not controlled by
a wall switch (this will assure that the unit
has uninterrupted power). The battery
will fully charge within 5 hours.
The use of a non-rechargeable or incompatible
Charging and Batteries
9