Subscribe to Our Youtube Channel
Related Manuals for ERGO-FIT VECTOR KRAFT
Summary of Contents for ERGO-FIT VECTOR KRAFT
- Page 1 Owner‘s manual VECTOR VECTOR KRAFT VECTOR KRAFT VECTOR KRAFT Please read this manual carefully before use and keep it in a safe place for future reference...
- Page 3 ERGOFIT GmbH & Co. KG. Trademark: ERGO-FIT and the ERGO-FIT Logo are registered trademarks of ERGO-FIT GmbH & Co. KG. All other trademarks mentioned or shown in the following text are trademarks of the respective owners and are recognised as protected.
- Page 4 Dear customer, We are glad that you have decided to purchase an ERGO-FIT training tool. You are now the owner of a sophisticated and exclusive training system that combines highest technical standards with practice oriented ease of use. This owner’s manual contains information on multiple gym machines. For this reason, you will find explanations that do not apply to your training machine.
-
Page 5: Table Of Contents
Maintenance......................75 Troubleshooting ..................... 79 Appendix........................83 Please note: This user manual provides information on several devices. Details may vary depending on your model! Technical and optical modifications as well as misprints reserved © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 7: General Information
Parts included in the delivery................Customer service ....................Please note: This user manual provides information on several devices. Details may vary depending on your model! © 2020 by ERGO-FIT GmbH & Co. KG Technical and optical modifications as well as misprints reserved... -
Page 8: Ergo-Fit Strength Equipment At A Glance
Among others, the eccentric technique, integrated beverage holders, and the concentration on functional aspects are highlights of the whole product line. In addition, it is the ease of use and the customisation that demonstrate ERGO-FIT’s focus: A high technical standard, optimal training possibilities and precise training control, combined with customer-friendly ease of use. -
Page 9: General Information On This Manual
This manual provides you with helpful information, regardless of if you are already familiar or have no experience with ERGO-FIT training machines. It is structured in a way that you can find the desired information in the table of contents easily and thematically. -
Page 10: Customer Service
Service and spare parts: Phone: +49 (6331) 2461-20 international +49 (6331) 2461-45 international +49 (6331) 2461-23 national +49 (6331) 2461-27 national +49 (6331) 2461-29 national © 2020 by ERGO-FIT GmbH & Co. KG Technical and optical modifications as well as misprints reserved... -
Page 11: Safety Information
Please note: This owner’s manual contains information on multiple gym machines. There may be variations in detail according to the type of machine! Technical and optical modifications as well as misprints reserved © 2020 by ERGO-FIT GmbH & Co. KG... - Page 12 In order to reduce risk of injury please wear appropriate clothes and footwear for exercise. ⊗ In case of nausea, dizziness, pain in the chest, limbs or joints, stop workout Technical and optical modifications as well as misprints reserved © 2020 by ERGO-FIT GmbH & Co. KG...
- Page 13 Carefully lower the weights during the workout. They must not be thrown since any impact may damage the weights. ⊗ Do not touch the USB port, RS232 port or audio port during the training. Technical and optical modifications as well as misprints reserved © 2020 by ERGO-FIT GmbH & Co. KG...
- Page 14 ⊗ Never put wood, cardboard or similar materials underneath the machine to compensate surface unevennesses. This increases the risk of an accident. Technical and optical modifications as well as misprints reserved © 2020 by ERGO-FIT GmbH & Co. KG...
- Page 15 Only use the machine for the purposes it was intended for. If you use the ERGO-FIT machine for other than the intended purpose, you will be charged for all damages resulting from this. In this case any warranty is void! ⊗...
- Page 16 (e.g. coronary heart diseases, heart attack, bypass surgery, transplantation, heart failure, severe cardiac arrhythmia) that indicate physical activity in cardiac rehab groups only. ⊗ acute thrombosis Technical and optical modifications as well as misprints reserved © 2020 by ERGO-FIT GmbH & Co. KG...
-
Page 17: Short Manual
Please note: This owner’s manual contains information on multiple gym machines. There may be variations in detail according to the type of machine! Technical and optical modifications as well as misprints reserved © 2020 by ERGO-FIT GmbH & Co. KG... - Page 18 Avoid jerky movements. If you want to stop the workout, control the downward motion of the weights. The exercise is finished only when the training weight is resting. Technical and optical modifications as well as misprints reserved © 2020 by ERGO-FIT GmbH & Co. KG...
-
Page 19: Destination Of The Product
Please note: This owner’s manual contains information on multiple gym machines. There may be variations in detail according to the type of machine! Technical and optical modifications as well as misprints reserved © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 20: Back Muscles
The restraint of the thighs makes the workout more effective. The seat height adjustment allows users to set an optimal training position. Technical and optical modifications as well as misprints reserved © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 21: Shoulder Muscles
The training strain is controlled using plug-in weights. The seat height adjustment allows users to set an optimal training position. Technical and optical modifications as well as misprints reserved © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 22: Abdominal Muscles
The training strain is controlled using plug-in weights. Regular workouts on this machine prevent an unstable knee joint. Technical and optical modifications as well as misprints reserved © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 23: Vector Leg Flexion
The VECTOR SEATED DIP, a resistance machine, is designed for dip exercises in seated position. It supports the athlete‘s training performance and strengthens the triceps as well as parts of the shoulder and chest muscles. Technical and optical modifications as well as misprints reserved © 2020 by ERGO-FIT GmbH & Co. KG... - Page 24 Destination of the product Technical and optical modifications as well as misprints reserved © 2020 by ERGO-FIT GmbH & Co. KG...
-
Page 25: Transport And Setup
VECTOR LEG FLEXION ....................... 5.5.7.3 VECTOR SQUAT PRESS ......................33 5.5.8 Multifunctional......................34 5.5.8.1 VECTOR PULL UP/DIP ......................34 5.5.8.2 VECTOR SEATED DIP ......................Technical and optical modifications as well as misprints reserved © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 26: Transport
If ERGO-FIT machines are delivered by a freight forwarder, the customer needs to dispose of the packaging himself or can send it back to ERGO-FIT GmbH & Co. KG (the customer is responsible for the transportation costs). -
Page 27: Ambient Temperature
Do not use any other methods to take off the cover. This may cause injuries and may damage the cover and the surroundings. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... - Page 28 The strain relief can be opened with a Phillip screwdriver to insert the power cable and the LAN cable (if applicable). Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG...
-
Page 29: Power Supply
Before connecting your ERGO-FIT exercise machine to your power supply system, compare the acceptable voltage and frequency on the name plate (next to power entry module) with your local data. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 30: Cabeling
We recommend DC-isolated cables for the connection of external equipment to a VECTOR Kraft machine. 5.4.2 Cabeling If you have connected several ERGO-FIT machines to one circuit never switch on multiple machines. ⊗ Make sure that nobody can step on or stumble across the power cord. -
Page 31: Vector Back Pull
3 Weight plate pin (secured) + weight stacks 4 Chest pad 5 Handle 6 Panel PC (version T, T MED, CVT, CVT MED) Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 32: Vector Lat Pull
3 Seat pad 4 Seat height adjustment 5 Panel PC (version T, T MED, CVT, CVT MED) 6 Handle 7 Arm pad Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 33: Vector Shoulder Press
3 Panel PC (version T, T MED, CVT, CVT MED) 4 Entry assistance 5 Back pad 6 Shroud with internal weight stack Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 34: Vector Chest Press
4 Chest pad 5 Seat pad with Seat height adjustment 6 Handle 7 Panel PC (version T, T MED, CVT, CVT MED) 8 Cam Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 35: Vector Triceps Extension
2 Storage 3 Weight plate pin (secured) + weight stacks 4 Footrest 5 Handle 6 Seat pad 7 Chest pad 8 Cam Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 36: Vector Abdominal Torsion
2 Storage 3 Weight plate pin (secured) + weight stacks 4 Knee pad 5 Footrest 6 Handle 7 Seat pad 8 Back pad Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 37: Vector Adductor
2 Panel PC (version T, T MED, CVT, CVT MED) 3 Handle 4 Upper body stabilizer 5 Footrest 6 Cam 7 Shroud with internal weight stack Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 38: Thigh Muscles
5 Weight plate pin (secured) + weight stacks 6 Cam 7 Panel PC (version T, T MED, CVT, CVT MED) 8 Storage 9 Thigh stabilizer Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 39: Vector Squat Press
5 Back pad 6 Guide 7 Handle 8 Seat pad 9 Foot plate 10 Panel PC (version T, T MED, CVT, CVT MED) Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 40: Multifunctional
2 Weight plate pin (secured) + weight stacks 3 Seat pad with Seat height adjustment 4 Handle 5 Adjustable back pad 6 Back pad Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 41: Setup
Eccentric function....................39 Function test ......................40 Please note: This user manual provides information on several devices. Details may vary depending on your model! Technical and visual modifications as well as misprints reserved © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 42: Switching On
After the warm-up period the weight plates should be correctly displayed in the Cockpit. You can now start your workout. We recommend DC-isolated cables for the connection of external equipment to a VECTOR Kraft machine. Switching on ⊗... -
Page 43: The Control Panel (T, T Med, Cvt And Cvt Med Only)
The Control Panel (T, T MED, CVT und CVT MED only) ERGO-FIT exercise equipment is known for its outstanding ease of use. VECTOR Kraft Line control panels (panel pc‘s) for example are equipped with a user guidance system that is simple and easy to understand. -
Page 44: The Buttons
Resistance adjustment On all machines of the VECTOR Kraft series the resistance can be adjusted by adding or reducing the number of snap-on weights. Dowel pins are used to adjust the weight by inserting them into the borings in the snap-on weights. The weights may be chosen directly from the machine. -
Page 45: Additional Weight
(moment arm) that is moved by the trainee. The set weight is transferred to the outer border of the eccentric disc via a flat belt. Technical and visual modifications as well as misprints reserved © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 46: Function Test
To meet individual needs, the moment arm may be adjusted in relation to the eccentric to allow for strain adjustment by modifying the link positions. Some machines of the VECTOR Kraft Line are not equipped with an eccentric. This is due to the vertical (VECTOR LAT PULL, VECTOR SHOULDER ABDUCTION, VECTOR... -
Page 47: Operation
Test ........................... 44 Default settings....................... 46 Please note: This user manual provides information on several devices. Details may vary depending on your model! Technical and optical modifications as well as misprints reserved © 2020 by ERGO-FIT GmbH & Co... -
Page 48: Operation Modes (Versions T, T Med, Cvt Und Cvt Med)
Press the STOP button to end the exercise. You will then see a summary of your workout. Press the STOP button again to return to the start mode Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 49: System
To start a RFID workout put on the RFID wristband and hold the printed area (ERGO-FIT logo) over the RFID receiver until your data is displayed. The „Device Settings“ window will open. Here you find all setup options for the device plus the workout settings for the specific user. -
Page 50: Test
For any fitness test you first need a Test Plan and a RFID wristband. To start the strength test, hold the RFID wristband with the printed area (ERGO-FIT logo) over the RFID receiver until your data is displayed. You will see all setup options for the device plus the workout settings for the specific user. - Page 51 REPEAT. If you apply your results you will see your personal power level based on these results. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG...
-
Page 52: Default Settings
Touch the language you want to use. It will be checked and highlighted according to your color scheme. Confirm your selection by pressing SAVE. Press BACK to return to the User Settings menu. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... - Page 53 Please note: This owner’s manual contains information on multiple gym machines. There may be variations in detail according to the type of machine! Technical and optical modifications as well as misprints reserved © 2020 by ERGO-FIT GmbH & Co. KG...
-
Page 54: The Effect Of Training
(growth of muscle diametre, increase in maximum strength, firming body tissue) and maintenance of strength performance (strength endurance training: increasing fatigue resistance during stress, firming body tissue). Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 55: Workout
Carry out a warmup on the exercise machine before each exercise sequence to specifically prepare the muscles for the upcoming strain (low intensity, high number of repetitions). Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 56: Training Tips
You should always take into account biomechanical considerations when you exercise. This is why we have listed aspects concerning this matter for each of the strength exercise machines in this chapter. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 57: Back Muscles
Now lower your upper body forwards again, making sure to maintain control. Stop the return motion in time so that your torso does not sag downwards. Breathe in during the return sequence. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 58: Vector Back Pull
Now lower your upper body forwards again, making sure to maintain control. Stop the return motion in time so that your torso does not sag downwards. Breathe in during the return sequence. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 59: Vector Butterfly Reverse
Exercise variations: Vary the angle between your arm and torso (adjust the height of the handlebars) to work different areas of the back muscles individually. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 60: Vector Lat Pull
Breathe in during the return sequence. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 61: Shoulder Muscles
Now return your arms, making sure to maintain control. Stop the return motion shortly before reaching the torso. Breathe in during the return sequence. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 62: Vector Shoulder Press
Exercise variations: Choose a different handlebar position so that your palms are facing each other. Continue the exercise exactly as described above. With this variation, you can increase the effect on the triceps brachii. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 63: Chest Muscles
An angle of less than 90° (arm extended downwards) increases the stress on the lower part. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 64: Vector Chest Press
Now release the handles and return them to the start position. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 65: Upper Arm Muscles
Place your feet about shoulder width apart. Rest your hands on the arm pads and grasp the handlebars with your hands. Your palms are facing Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 66: Vector Triceps Extension
Grasp the handlebars with your hands. Your palms are facing each other. Your elbows should be at the height of the machine’s rotation axis and your Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 67: Abdominal Muscles
Place the balls of your feet on the footrests (feet about shoulder width apart). Hug the chest pad with your arms (also see Chapter 5.5). Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 68: Vector Abdominal Torsion
Contract your lateral abdominal muscles and turn your upper body to the left against the resistance of the pad. Breathe out when you exert strain against the resistance. Maintain this position momentarily. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 69: Pelvic Muscles
Open your legs against the resistance of the machine as far as you can. Breathe out when you exert strain against the resistance. Maintain this position momentarily.. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 70: Vector Adductor
Return to the start position by closing your legs. Stop the return motion when your legs are opened as wide as possible. Breathe in during the return sequence. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 71: Vector Hip Extension
Exercise variations: Place your right foot on the ground and your left foot on the footrest. Continue the exercise as described above with the other leg. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 72: Thigh Muscles
Exercise variations: You can also perform this exercise with only one leg. This prevents the stronger leg from performing more of the work. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 73: Vector Leg Flexion
Exercise variations: You can also perform this exercise with only one leg. This prevents the stronger leg from performing more of the work. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 74: Vector Squat Press
Bend your legs to return to the start position. Stop the return motion once the legs reach an angle of approx. 90°. Breathe in during the return sequence. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... - Page 75 20), so that the max. weight load of the Aero-Step of 200 kg is not exceeded. Please completely refrain from jumps or quick thrusts, even when adjusting at a low weight. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG...
-
Page 76: Multifunctional
Let yourself sink until your arms are almost completely straight. Make sure not to hyperextend your elbow joints. Breathe in during the return sequence. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 77: 8.5.8.1.2 Vector Dip
Make sure not to hyperextend your elbow joints. Breathe out when you exert strain against the resistance. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 78: Vector Seated Dip
Now bend your elbows and return the handles, making sure to maintain control. Stop the return motion once your arms reach the height of your shoulders. Breathe in during the return sequence. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 79: Maintenance
Please note: This owner’s manual contains information on multiple gym machines. There may be variations in detail according to the type of machine! Technical and optical modifications as well as misprints reserved © 2020 by ERGO-FIT GmbH & Co. KG... - Page 80 ⊗ steel cables, Kevlar cables, rollers, handles, levers or snap-on weights are damaged Maintenance of the machine may be carried out by ERGO-FIT’s customer service department. A maintenance contract may also be implemented. Care and maintenance During manufacturing of its training machines, ERGO-FIT makes every effort to reduce future maintenance.
- Page 81 Note that the power cord is unplugged when opening the cockpit! ⊗ Clean your machine with a damp cloth, mild cleaning agent or soap suds only and dry it with a soft cloth. Technical and optical modifications as well as misprints reserved © 2020 by ERGO-FIT GmbH & Co. KG...
- Page 82 Maintenance Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG...
-
Page 83: Troubleshooting
Please note: This owner’s manual contains information on multiple gym machines. There may be variations in detail according to the type of machine! Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... - Page 84 If you were not present when the error message was displayed, ask the user what exactly happened. ⊗ Try to fix the error yourself (see: error messages) or contact the ERGO-FIT service center. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG...
- Page 85 Problem: The RFID wristband has not yet been initialized in Vitality System or the RFID wristband was not held close enough to the RFID receiver. Solution: Hold the RFID wristband again with the printed area (ERGO-FIT logo) over the RFID receiver until your data is displayed. If this is not the case, reinitialize the RFID wristband.
- Page 86 Troubleshooting Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG...
- Page 87 Please note: This owner’s manual contains information on multiple gym machines. There may be variations in detail according to the type of machine! Technical and optical modifications as well as misprints reserved © 2020 by ERGO-FIT GmbH & Co. KG...
-
Page 88: A Appendix
Technical specifications This chapter provides the technical specifications of your strength exercise machine. The specifications are listed in separate charts for each model of the VECTOR Kraft Line 4 and sorted by muscle groups. Technical and optical modifications as well as misprints reserved... -
Page 89: Back Muscles
+10°C to +40°C Ambient temperature: Storage -30°C to +50°C -30°C to +50°C Relative humidity 30% to 75% 30% to 75% non condensing non condensing Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 90: Shoulder Muscles
+10°C to +40°C Ambient temperature: Storage -30°C to +50°C -30°C to +50°C Relative humidity 30% to 75% 30% to 75% non condensing non condensing Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 91: Upper Arm Muscles
+10°C to +40°C Ambient temperature: Storage -30°C to +50°C -30°C to +50°C Relative humidity 30% to 75% 30% to 75% non condensing non condensing Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 92: Pelvic Muscles
Weight transmission Steel cable Ambient temperature: Operation +10°C to +40°C Ambient temperature: Storage -30°C to +50°C Relative humidity 30% to 75% non condensing Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 93: Thigh Muscles
Weight transmission Stahlseil Ambient temperature: Operation +10°C bis +40°C Ambient temperature: Storage -30°C bis +50°C Relative humidity 30% bis 75% nicht kondensiert Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 94: Multifunctional
+10°C to +40°C Ambient temperature: Storage -30°C to +50°C -30°C to +50°C Relative humidity 30% to 75% 30% to 75% non condensing non condensing Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... -
Page 95: Electromagnetic Emission And Interference Immunity
Locations for the intended use of ERGO-FIT devices are professional healthcare facilities, except in the vicinity of RF surgical equipment and outside the RF shielded room of a ME system for magnetic resonance imaging, as well as in home healthcare areas (e.g. - Page 96 Appendix Electromagnetic emission and immunity, compliance and test level ERGO-FIT products are intended for use in the areas specified above. Please make sure to only use the product in appropriate environments. The product uses HF processes only for internal functions. Since the machine complies with the requirements of class B, its RF emissions are rather low, and it is unlikely that neighboring electronic devices will be affected.
- Page 97 60 % 100 ms → C 60 % 100 ms → A fluctuation in compliance >98 %5000ms → C >98 %5,000ms → A with IEC 61000-4-11 Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG...
- Page 98 2400 – 2570 Bluetooth, WLAN 2450 802.11 b/g/n, RFID 2450, LTE Range 7 5100 5240 – 5800 5500 WLAN 5785 802.11 a/n Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG...
-
Page 99: Warranty Clauses
All merchandise that has not been produced by the seller is subject to legal provisions. _____________________________ * see General Terms of Sales and Delivery Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... - Page 100 ⊗ Adjusting Lever ⊗ Paddings ⊗ Cable-winch sensor ⊗ Seat, tread, handholds The warranty is voided if maintenance instructions are not observed! Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG...
-
Page 101: Safety Information
All users of the machine must be informed of the dangers and safety regulations. The manufacturer will not be liable for personal injury or material damage. Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG... - Page 102 Appendix Technical and optical modifications as well as misprints reserved - © 2020 by ERGO-FIT GmbH & Co. KG...
- Page 104 ERGO-FIT GmbH & Co. KG Blocksbergstraße 165 – 66955 Pirmasens Tel.: 06331 2461-0 – Fax: 06331 2461-55 info@ergo-fit.de – www.ergo-fit.de...
Need help?
Do you have a question about the VECTOR KRAFT and is the answer not in the manual?
Questions and answers