8. Oak Cabinets
Using a spirit level make sure that the supplied mounting brackets
are level and mark the position of the bracket mounting points. The
spacing of the brackets will vary depending on the model you have
chosen and can be found within the cabinets packaging.
Using an appropriate drill bit for your wall drill the mounting holes
and t wall plugs. The plugs supplied are suitable for brick walls only,
if in doubt please consult your local DIY store for advice on alternative
Depending on your model, should be remove both side panels or
top panel of your cabinet by removing the xing screws located on
the frame. This will allow you to gain access to the cabinets mains
connection terminal block and mounting adjustors.
Illuminated Bathroom Mirrored Cabinets