There are two types of door spacer supplied a), the drilled through
spacer should be tted to the top part of the door by simply pushing
into position b), and the solid based spacer to the bottom should be
held into place whilst you position the door on the cabinet. Use the
pointed grub screws c) provided and attach the door to the cabinet.
If adjustment door height adjustment is required this can be
achieved by screwing the bottom grub screw in or out.
7. Shelf Adjustment
Depending on your model there will be either four or two shelf
brackets per shelf. Each type adjust in the same way. For height
adjustment loosen the bracket screw a) and move the bracket to
required height and retighten. Slot in your shelf and secure by
screwing in the plastic grommets b).
Illuminated Bathroom Mirrored Cabinets