Download Print this page

Illuminated Mirrors Diamond X Series Installation & User Manual page 5

Bathroom cabinet
Hide thumbs


This product should only be installed by a fully quali ed
electrician in accordance with the current IEE wiring regulations
(UK) or the equivalent national wiring regulation outside of the
UK. This light tting is a Class I product and therefore must be
earthed. Always switch o the electricity supply at the mains
before and during installation of this product.
Our Class II Solid Oak cabinets do not require an earth
1. This product is IP44 rated so can be safety tted in Zones 2
and 3. Position the cabinet in a suitable location with at least
15cm clearance between the proximity sensor and the
nearest surface and according to the zonal diagram show
below, ensuring that the domestic electrical mains supply is
within reach of the electrical entry point of the product.
6 0 c m
6 0 c m
6 0 c m
6 0 c m
6 0 c m
R a d i u s
Illuminated Bathroom Mirrored Cabinets
Instruction manual



  Related Manuals for Illuminated Mirrors Diamond X Series