Summary of Contents for Illuminated Mirrors 100877K99
Page 1
Model: 100877K99 & K100 Diamond X Collection | From www.illuminated-mirrors.uk.com INSTRUCTION MANUAL...
Page 2
Diamond X Collection | LED Magnification Mirror with 3x Magnification area and Sensor (Model Numbers: 100877K99 & 100) Thank you for purchasing our illuminated mirror(s). To avoid product damage, personal injuries, carefully read, understand, and follow all the Instructions in this installation guide before installing the product.
Page 3
Model: 100877K99 & K100 Diamond X Collection | WARNING! To avoid the risk of electrocution, please turn off the electricity supply mains before commencing the installation. INSTRUCTION MANUAL...
Model: 100877K99 & K100 Diamond X Collection | CONTENT I. STANDARDS a. Safety Instructions b. IP Rating c. Bathroom Zones II. PARTS III. STEP-by-STEP INSTALLATION Step 1: Route a 240v mains electric cable near where you would like to install the mirror.
Model: 100877K99 & K100 Diamond X Collection | I. STANDARDS a. Safety Instructions Installation of this product can require a qualified electrician. If necessary, hire or consult a qualified electrician in accordance with the current IEE Wiring Regulations and UK Building Regulations for assistance before continuing.
Model: 100877K99 & K100 Diamond X Collection | II. PARTS (Figure i) – LED Magnification Slimline Mirror and its parts. INSTRUCTION MANUAL...
Page 7
Model: 100877K99 & K100 Diamond X Collection | III. INSTALLATION Please turn off the electricity supply mains before commencing the installation. Wiring Colours: Earth (E) GREEN Neutral (N) BLUE Live (L) BROWN Step 1: Route a 240v mains electric cable near where you would like to install the mirror.
Page 8
Model: 100877K99 & K100 Diamond X Collection | Step 3: Using a spirit level make sure the back plate is level and in the correct position on the wall. Step 4: Next using a drill and screw driver fix the back plate on to the wall, with the fittings supplied.
Model: 100877K99 & K100 Diamond X Collection | Step 5: Now the Back plate is fixed to the wall you can connect the lights, demister pad and shaver socket to the 240v electrical supply. Step 6: Simply place the mirror over the back plate and using a screw driver tighten and fix it in place.
Model: 100877K99 & K100 Diamond X Collection | IV. CARE AND CLEANING Please be aware when cleaning the mirror surface, do not to use abrasive materials as these will damage the overall finish. V. FAQs 1. What is a LED Mirror? A LED Mirror uses Energy Saving LED light bulbs.