usi ARL-PRO-2700 Owner's Manual page 4

Electrical Safeguards...
 Never override or attempt to defeat electrical or mechanical safety interlock devices.
 The laminator has been manufactured with a plug on the machine designed to
operate on a 115volt, 15 Ampere circuit.
 Disconnect the power supply before servicing your laminator. If you service the
laminator yourself, contact USI Technical Support for additional safety
recommendations. Use only USI parts for service or replacement. Failure to use USI
parts could void manufacturer's warranty. Note: Always turn the laminator "OFF"
and unplug it from the power outlet before attempting any service.
 The laminator should only be operated from the type of power source indicated in this
OWNERS MANUAL and on the serial label located on the rear panel of the unit.
 Do not leave the laminator power "ON" for extended periods while not in use.
Unplug the machine at the end of the day as a precaution against a possible fire
hazard.
 Do not operate the laminator with a damaged power supply cord or plug. Do not
use an extension cord. Do not abuse the power supply cord; never pull cord to
disconnect it from a power supply. Do not allow cord to contact heat, oil or sharp
edges. Do not cut off or otherwise bypass the grounding prong on the plug.
 Replace fuses only with same type fuses. Contact USI for replacement fuses.