For Your Safety - usi ARL-PRO-2700 Owner's Manual

For your safety...

Please review the following safety precautions
 Do not connect the laminator to electrical power or attempt to operate it until you
have read the OWNERS MANUAL completely and understand it. If there are any
areas of proper laminator operation that you do not understand, contact USI
Technical Support for recommendations. Keep this manual in a convenient
location for future reference.

 Read all safety messages located in this OWNERS MANUAL and on the
laminator very carefully.
 Use care in unpacking and lifting the laminator as it weighs 80 pounds. Keep the
laminator level when lifting or moving it.
 Consider the work area. A cluttered work space can lead to accidents. The
laminator should be placed on a level, sturdy surface. Do not operate the
laminator in a damp or wet environment. Do not operate electrical devices in the
presence of flammable liquids, solvents or in gaseous/explosive atmospheres.
Keep the work area well lit. Allow sufficient access to the front and the back of
the laminator.

 Respect the heated rollers. Operating temperatures are hot enough to burn skin.
If clearing a film wrap-around or jam on or near the heaters, first set the Heat
Switch to the "OFF" position and allow the laminator to cool to room temperature.
Do not operate the laminator without the heat guard in place. Before lifting or
moving the laminator, set the Heat Switch to the "OFF" position and allow it to
cool to room temperature.

 Removing the feed table exposes hot and moving parts. This means that you can
be harmed if you remove the feed table. When running the machine without the
feed table in position, use care to reduce the risk of injury to the operator.

 Do not operate this laminator without all detachable parts installed correctly.
This means that there is risk of injury if this product is operated without all of its
parts in their proper positions.

 Keep hands and clothing away from rollers. The rollers are pinch points that can
trap body parts or clothing and cause serious injury. Do not wear any loose
clothing, ties, jewelry, etc. which can be caught by rollers and draw any body part
into the machine.
 Set the Drive Switch to the "OFF" position before walking away or leaving the
laminator unattended. Use common sense; be cautious when operating your
laminator. Do not operate the laminator when you are tired or your reactions are
impaired in any way. Do not allow anyone to operate the laminator who has not
received proper instruction and has not read the safety precautions. Keep
children away.

 Do not use the laminator for other than its intended purpose.
