Bells Are Not Ringing Per Schedule - Primex XR Troubleshooting Manual

Bells are Not Ringing Per Schedule

Problem
Wireless Tone Generator is setup correctly, downloaded a schedule to the Transmitter, and bells did not ringing
per downloaded schedule.
Cause
The Wireless Tone Generator receives event data from the Transmitter. The process can take up to 20 to 30
minutes for this to occur, which is dependent on how many schedule IDs are in use.
Solution
The Wireless Tone Generator LED screen has an Event LED – this can be used to identify if it has a valid schedule for
the specified ID number. The Event LED goes OFF when it receives an event that is different from the current event
stored in its memory. Once it receives all the events from the Transmitter relating to the specified ID, the Event LED
will turn back on – indicating the new schedule has been received in its entirety.
4
Wireless Tone Generator - Bell & Tone Scheduling Troubleshooting Guide