Table of Contents
Advertisement
Handset user guide
Installation of the telephone line
1. Installing the handset
Insert the battery pack into its housing in the handset, ensuring that it is the right
way round.
Check that the screen lights up, then replace the cover.
Wait for about 1 minute to allow the system to start up.
When your handset is registered to its base, the screen displays the figure "1"
alongside the [ ] symbol.
Only use rechargeable battery packs with specifications exactly the same as
!
those supplied with the product.
The use of a non- rechargeable or incompatible battery pack may damage
the product and may be hazardous to health (please refer to Chapter
"Technical specifications").
2. Installing the charger
There are 2 options for connecting the charger of your product.
Connecting the charger without external power supply directly to the ACG front panel
Using the provided external power adapter (5V 200 mA)
Once this installation is complete, we recommend that you leave the phone on the charger
for 6 hours after the installation and before using it for calls and browsing content in order to
maximize battery performance and life.
User Manual ACG905 – draft
5
Advertisement
Table of Contents
